Why the Right Flange Fit Matters for Comfort
A comfortable pumping session starts with a well-fitting flange. The flange, also called a breast shield, is the funnel-shaped piece that fits over your nipple and forms a seal around your areola. When the fit is correct, the vacuum created by the pump draws your nipple into the funnel gently for effective milk removal. If the fit is off, you may experience discomfort, reduced output, or both.
The BabyBuddha 24mm Flange Kit is designed for users who need a 24mm opening. However, the right flange size depends on your nipple measurement, not a guess. A flange that is too small can pinch, while one that is too large may pull in too much areola, causing pain or inefficient pumping.
What the 24mm Flange Kit Includes
-
24mm Flange Kit: Two (2) 24mm Flange and assembly kits You get two complete sets, so you can pump both sides or have a spare ready.
24mm Flange Kit
-
24mm Flange Kit: Two (2) Duckbill Valves These valves control milk flow and prevent backflow; replacing them when worn maintains suction.
-
24mm Flange Kit: Two (2) Silicon Diaphragms Diaphragms help create the vacuum; swapping them periodically keeps pump performance consistent.
-
24mm Flange Kit: Massage cushions are now included with the 24mm Flange Kit! The massage cushions can improve comfort and may help with milk flow during pumping.
Check Your Fit Before You Pump
Start by measuring your nipple diameter (not the areola). A 24mm flange is a common starting size, but your actual nipple size may call for a different opening. If the 24mm flange pulls in too much areola or feels uncomfortable, you may need an insert for a better fit. BabyBuddha offers a fit guide to help you determine the right size.
When you place the flange, your nipple should move freely in the tunnel without rubbing the sides. A small amount of areola will be drawn in, but excessive pulling or pinching means the size is wrong. Comfort during pumping is a reliable sign that the fit is correct.
How to Assemble and Use the 24mm Flange Kit
- Attach the silicone diaphragm: Place the silicone diaphragm over the top of the flange assembly. Ensure it sits flat and seals properly.
- Insert the duckbill valve: Fit the duckbill valve into the bottom of the flange. It should snap into place securely. A loose valve can reduce suction.
- Add the massage cushion (if desired): The included massage cushion can be placed inside the flange for added comfort. It may help stimulate milk flow.
- Connect to your BabyBuddha pump: The 24mm Flange Kit is compatible only with the BabyBuddha Pump. Attach the assembled flange to the pump body or tubing as directed by your pump manual.
- Center your nipple and pump: Position the flange so your nipple is centered in the tunnel. Start pumping at a low suction level and increase gradually until you find a comfortable, effective setting.
Cleaning and Care to Extend Flange Life
You can extend the life of your flange by cleaning it thoroughly after each use. Wash all parts with warm, soapy water and allow them to air dry. Avoid using abrasive brushes that could scratch the silicone, as scratches can harbor bacteria and affect the seal.
Even with good care, flanges wear out over time. The silicone can lose its flexibility, and small tears may develop that reduce suction. Plan to replace your flanges every 6-12 months, and no later than 12 months of use, to maintain comfortable and effective pumping.
When to Replace Parts in Your 24mm Flange Kit
The duckbill valves and silicone diaphragms are the parts most likely to affect suction. If you notice a drop in pump performance or milk output, check these components first. A worn duckbill valve may not close fully, and a stretched diaphragm may not create a proper vacuum. Replace them as needed, and keep the spare set from your kit as backups.
For the flanges themselves, inspect them regularly for cracks, warping, or loss of shape. If the flange no longer forms a good seal against your breast, or if it feels less comfortable than before, it is time for a replacement. The 6-12 month replacement window is a safe guideline for most users.
A Note on Compatibility
The 24mm Flange Kit is designed specifically for the BabyBuddha Pump. It will not work with other pump brands. If you are using a different pump, check your pump's compatibility before purchasing. For BabyBuddha users, this kit provides all the essential parts for a comfortable, efficient pumping experience.
