What This Kit Includes

The 2 3/4" x 5 1/4" H&L Yellow Foam Pad Kit comes with a yellow foam pad and 50 sheets of hook-and-loop abrasive. The pad's hook-and-loop backing lets you quickly attach and swap sanding sheets without adhesives or clips. The kit is available in grits from 60 to 320, so you can handle tasks from rough material removal to fine finishing.

Setting Up the Foam Pad Kit

Follow these steps to get your foam pad and abrasive sheets ready for use.

  1. Attach the pad to your sander: Press the hook-and-loop backing of the yellow foam pad firmly onto the hook-and-loop surface of your sander's backup pad. Make sure it is centered and fully seated.
  2. Choose your grit: Select a sheet from the 50 included sheets in the grit that matches your task. Use 60-80 grit for heavy stock removal, 100-150 for general sanding, and 180-320 for finishing or between coats.
  3. Attach the abrasive sheet: Align the hook-and-loop backing of the sheet with the foam pad and press it into place. The sheet should lie flat without wrinkles.
  4. Begin sanding: Use light, even pressure and let the sander do the work. The foam pad provides some cushioning, which helps conform to slight contours and reduces the risk of gouging.
  5. Change sheets as needed: When the abrasive loads or dulls, peel off the used sheet and attach a fresh one. The hook-and-loop system makes changes quick.

Grit Selection and Project Fit

The kit covers a wide grit range from 60 to 320. For rough wood or paint removal, start with 60 or 80 grit. For smoothing surfaces or removing light scratches, move to 100-150 grit. For final finishing or sanding between coats of paint or varnish, use 180-320 grit. The 50 sheets per kit give you plenty of material for multiple projects.

Care and Storage Tips

Keep the foam pad clean and free of debris. After use, remove the abrasive sheet and store the pad in a dry place. The hook-and-loop backing can lose grip if it becomes clogged with dust; gently clean it with a soft brush or compressed air. Store unused abrasive sheets flat in a cool, dry area to keep the hook-and-loop backing effective.

Kit Specifications at a Glance