What You Get in a Christmas Cracker Kit

A Christmas cracker kit gives you everything you need to make your own festive party crackers, except the treats and ribbon. The 10 Pack Christmas Cracker Kit - Jingle Bells Christmas includes 10 heavyweight double-sided die-cut wrappers, 10 snaps, and 10 cardboard reinforcements. The wrappers feature illustrations by Sally Murphy and can be made with either face outward, so you can choose your preferred design.

Each completed cracker measures 37 cm long by 6 cm wide. The kit package itself is 195 mm wide by 375 mm long, making it easy to store or wrap as a gift.

How to Assemble Your Crackers

Assembling your own crackers is straightforward. You will need double-sided tape and ribbon (not included), plus your chosen treats or small gifts to fill each cracker.

  1. Prepare the wrapper: Choose which design you want on the outside and lay the wrapper on a table with that side facing down.
  2. Attach the snap and reinforcement: Lay a snap bang lengthwise in the center of the wrapper. Run a length of double-sided tape on one long edge of the reverse side. Attach a cardboard reinforcement using double-sided tape, butted to the long edge opposite your tape and centered inside the cut-outs.
  3. Roll and seal: Peel the double-sided tape and roll the cracker, adhering the tape. Use your fingers to sharpen the paper around the cardboard insert. The tape should stop before it hits the reinforcement and not overlap the cut-outs.
  4. Fill and close: Fill the cracker with your treats, then close one end with a ribbon bow. Seal the other end with ribbon when ready for Christmas.

Personalising Your Crackers

The real fun of a DIY kit is choosing what goes inside. Fill each cracker with small gifts, sweets, jokes, or party favours that suit your guests. The double-sided wrappers let you decide which illustration shows, so you can match your table décor or create a mix of designs across the set.

Kit Contents and Considerations

  • 10 Pack Christmas Cracker Kit - Jingle Bells Christmas: Kit includes 10 environmentally responsible, heavyweight double-sided die-cut cracker wrappers, 10 snaps, and 10 cardboard reinforcements. You have everything structural to make 10 crackers; you only need to supply double-sided tape, ribbon, and treats.

    10 Pack Christmas Cracker Kit - Jingle Bells Christmas

    10 Pack Christmas Cracker Kit - Jingle Bells Christmas

  • 10 Pack Christmas Cracker Kit - Jingle Bells Christmas: Crackers are not suitable for children under 3 years. Children ages 3–12 should be supervised when pulling crackers. Important safety note if you have young children at your party.

Tips for Best Results

Use a little double-sided tape to hold pieces in place—too much tape can prevent the cracker from snapping when pulled. Avoid overlapping the cut-outs with tape or the cardboard reinforcement, as this can also affect the snap. Sharpening the paper around the cardboard insert with your fingers helps create a clean, professional finish.