Why a dedicated breast pump rack matters
Breast pump parts have awkward shapes—flanges, valves, membranes, collection cups—that standard bottle racks don't hold well. The Baby Brezza Breast Pump Rack is designed to tackle that problem. It replaces the existing rack system in your Bottle Washer Pro so you can clean pump parts, bottles, and storage cups in one cycle without parts falling over or missing the spray.
What the rack includes
-
Breast Pump Rack for Bottle Washer Pro®: Complete Replacement Rack System: Includes top rack, bottom rack and connecting tubes - swap in easily for your existing Bottle Washer Pro® rack. You don't need to buy extra adapters—the whole rack system comes as a single package, ready to drop in.
Breast Pump Rack for Bottle Washer Pro®
-
Breast Pump Rack for Bottle Washer Pro®: Universal Fit: Works with ALL types and brands of breast pumps - including wearable pumps. Whether you use a Medela, Spectra, Lansinoh, or a wearable pump, the rack holds the parts without needing a separate insert.
-
Breast Pump Rack for Bottle Washer Pro®: Two powerful spray arms with 21 high-pressure spray jets ensure thorough cleaning inside and out. Those jets reach into flanges and valve openings that a standard rack might miss, reducing the need for hand-scrubbing.
How to swap in the breast pump rack
The rack replaces your existing Bottle Washer Pro rack system. No tools are needed, and the whole swap takes about a minute.
- Remove the existing rack: Open the washer door and lift out the current top and bottom racks along with the centre tube. Set them aside.
- Install the new bottom rack: Place the bottom rack onto the spray arm hub inside the washer. Make sure it sits flat and the centre tube connection is accessible.
- Connect the centre tube: Fit the supplied connecting tube between the bottom and top racks. Push it firmly into the designated sockets on both racks.
- Place the top rack: Set the top rack onto the centre tube. It should lock into place without wobbling.
- Load your pump parts: The top rack holds up to 7 large valves or membranes plus a small basket for tiny parts. The bottom rack holds up to 4 flanges, shields, collection cups, or storage bottles.
Loading tips for best cleaning results
Put the largest items on the bottom rack—flanges and collection cups face downward so the spray jets can reach inside. Use the top rack for valves, membranes, and the small basket for nipples or duckbills. Keep items separated so water can flow between them. Overloading reduces cleaning power, so stick to the stated capacities: 7 large items on top, 4 on the bottom.
What the rack does not cover
The Breast Pump Rack is a replacement rack system for the Bottle Washer Pro—it does not include detergent, descaling tablets, or a steriliser function. You will still need to run a cleaning cycle with your usual detergent tablet. The rack is not designed for baby bottles wider than standard flanges, though the bottom rack can hold storage bottles. For very small parts like nipple rings, use the included small basket rather than placing them loose on the rack.



