Quick Answer
The BERNINA #61 Zigzag Hemmer Foot creates a narrow rolled hem with a zigzag stitch in one pass. It works best on lightweight fabrics like silk, chiffon, and cotton lawn.
Why Use a Dedicated Hemmer Foot
The #61 foot folds the fabric edge over twice and guides it under the needle for a consistent, narrow hem. Without it, you'd need to hand-fold and stitch each section, which is slow and often uneven.
Step-by-Step Instructions
- 1. Prepare Your Fabric and Machine: Cut a straight edge on your fabric. Set your BERNINA machine to a narrow zigzag stitch (width 1.5–2.5 mm, length 1.5–2 mm). Attach the #61 foot. A clean, straight cut is essential for a uniform hem.
- 2. Position the Fabric Edge: Place the fabric under the foot so the raw edge aligns with the spiral guide on the foot. Lower the presser foot; the guide will fold the edge twice. If the fabric doesn't feed into the spiral, it may be too thick or the edge not straight.
- 3. Start Stitching Slowly: Begin sewing at a moderate speed. The foot will automatically fold and stitch the hem. Gently guide the fabric from behind, but do not pull. Let the foot do the work; pulling can distort the hem.
- 4. Check the Hem and Adjust: After a few inches, inspect the hem. If the zigzag misses the fold or the hem is too wide, adjust the stitch width or fabric alignment. Test on a scrap piece first to dial in the settings.
Product Facts
-
#61 BERNINA Zigzag Hemmer Foot: Creates narrow rolled hems with a zigzag stitch in a single pass. Saves time and ensures even hems on delicate fabrics.
#61 BERNINA Zigzag Hemmer Foot
-
#61 BERNINA Zigzag Hemmer Foot: Ideal for lightweight fabrics such as chiffon, silk, and cotton lawn. Prevents puckering and damage on fragile materials.