Why a 72% Pack for a Wooden Humidor?

If you store cigars in a wooden humidor, you may notice the internal humidity tends to drift lower than the pack's rating. This happens because wood naturally absorbs and releases moisture. The Boveda 72% pack is designed to compensate for that loss: wooden humidors typically lose 2–5% humidity, so a 72% pack keeps your cigars in the perfect range around 60%.

This makes the 72% rating a practical choice for wood humidors rather than an over-humidification risk. For sealed containers like acrylic jars or Tupperdors, a lower percentage pack would be more appropriate.

Boveda 72% Pack Specifications

How to Use a Boveda 72% Pack

Follow these simple steps to get the best results from your Boveda pack.

  1. Check your hygrometer: Before placing the pack, confirm your humidor's current humidity with a reliable hygrometer. This baseline helps you know if the 72% pack is the right choice for your setup.
  2. Place the pack in your humidor: Simply set the unopened Boveda pack on top of your cigars or inside the humidor tray. No soaking, no gel, no activation needed.
  3. Use the right number of packs: Add one 60g pack for every 25 cigars in your humidor. If your humidor is larger or has a heavy wood construction, you may need extra packs—always check with your hygrometer.
  4. Replace when rigid: The pack will gradually stiffen as it releases moisture. When it becomes hard and crunchy, it's time to swap in a fresh pack. Typical lifespan is about 3 months.

What to Watch For

The 72% pack is specifically formulated for wooden humidors. If you use it in a non-wood container, the humidity may climb too high. Always verify with a hygrometer—your cigars should stay around 60% relative humidity for optimal smoking condition.

Because each humidor behaves differently, the recommended one-pack-per-25-cigars is a starting point. Monitor your hygrometer over the first week and adjust pack count if needed.