What a Cabinet Hardware Jig Does

A cabinet hardware jig is a simple tool that solves a common frustration: drilling holes for drawer pulls and knobs that line up perfectly every time. Instead of measuring each hole individually and hoping for the best, a jig gives you adjustable guides and built-in scales to position your hardware consistently across multiple drawer fronts.

The Cabinet Hardware Jig from Kreg Tool is designed for this exact task. It includes adjustable guides for accurate hole placement, built-in measuring scales for repeatable results, and an adjustable edge guide for easy positioning. Whether you're installing single knobs or multi-hole pulls, this jig helps you get the alignment right.

Setting Up the Jig for Your Drawer Front

Before drilling, you need to set the jig to match your hardware and drawer dimensions. Start by measuring the distance from the edge of the drawer front to where you want the center of your knob or pull. Use the adjustable edge guide on the jig to set this distance precisely.

The built-in measuring scales on the jig let you lock in that measurement so you can repeat it on every drawer. If you're installing multi-hole pulls, the adjustable guides let you set the spacing between holes to match your hardware. The jig is versatile enough for both single and multi-hole knobs.

Step-by-Step Drilling Process

Once the jig is set, follow these steps for each drawer front.

  1. Position the jig: Place the jig on the drawer front with the edge guide flush against the edge. Double-check that the guide is aligned with your chosen edge distance.
  2. Secure the jig: Hold the jig firmly in place. The lightweight but strong materials make it easy to handle, but ensure it doesn't shift during drilling.
  3. Drill the holes: Use a drill with the appropriate bit for your hardware. The durable hardened-steel drill guides keep the bit on track for clean, accurate holes.
  4. Repeat for remaining drawers: Since the jig settings stay locked, you can move it to the next drawer front and drill identical holes without remeasuring.

Key Features That Help with Alignment

  • Cabinet Hardware Jig: Adjustable guides for accurate hole placement Lets you set the exact spacing for multi-hole pulls, so every hole lines up with your hardware.

    Cabinet Hardware Jig

    Cabinet Hardware Jig

  • Cabinet Hardware Jig: Built-in measuring scales for repeatable results Once you set the scale, you can drill the same pattern on every drawer without measuring each time.

  • Cabinet Hardware Jig: Adjustable edge guide for easy positioning Quickly sets the distance from the drawer edge, ensuring consistent placement across all fronts.

Tips for Consistent Results

Work on a stable surface and clamp the drawer front if needed to prevent movement. For best results, test the jig setup on a scrap piece of material before drilling your actual drawer fronts. This confirms the hole spacing and edge distance are correct.

The jig's durable hardened-steel drill guides help maintain accuracy over many uses. If you're installing hardware on a large set of drawers, the repeatable settings save significant time compared to manual measuring.