Why Double Sided Tape Belongs in Your Cardmaking Kit

Double sided tape is a staple for cardmakers because it bonds two surfaces invisibly, leaving no messy residue or drying time. Whether you are attaching die cut toppers, layering paper images, or fixing embellishments, a quality tape like Violet Studio Double Sided Tape gives you a strong hold with pinpoint accuracy.

This tape is especially useful when you want a clean, professional finish on cards without visible adhesive lines. Its extra strong adhesive mounts and bonds invisibly, so the focus stays on your design.

What You Get with Violet Studio Double Sided Tape

  • Violet Studios Double Sided Tape - 15m BULK X 3: This pack includes 3 rolls of 5mm wide tape, each roll is 15m long. The 5mm width is ideal for small die cuts and narrow edges, and the 15m length per roll means you can complete many projects before needing a refill.

    Violet Studios Double Sided Tape - 15m BULK X 3

    Violet Studios Double Sided Tape - 15m BULK X 3

Using Double Sided Tape for Cardmaking

The following steps show a typical use for attaching a die cut topper to a card front. The same technique works for layering images, attaching paper panels, or fixing lightweight embellishments.

  1. 1. Prepare your work surface and pieces: Have your card base, die cut topper, and a pair of scissors or a trimmer ready. Cut a length of double sided tape slightly shorter than the piece you are attaching.
  2. 2. Apply the tape to the back of the topper: Peel the backing paper from one side of the tape and press it onto the back of your die cut. Smooth it down firmly with your fingers or a bone folder to ensure full contact.
  3. 3. Remove the second liner and position the topper: Peel away the remaining backing paper to expose the adhesive. Carefully position the topper on your card front. Because the tape is already in place, you can adjust the position slightly before pressing down.
  4. 4. Press firmly for a strong bond: Once satisfied with the placement, press the topper down evenly. For extra security, run a bone folder or the back of a spoon over the surface. The invisible bond means no adhesive shows around the edges.

Tips for Best Results with Double Sided Tape

For small or intricate die cuts, cut the tape into narrow strips or even tiny dots to avoid adhesive showing from the sides. The 5mm width of Violet Studio tape is already narrow, but you can trim it further with scissors for precise application.

When layering multiple pieces, apply tape to each layer individually rather than stacking wet adhesive. This keeps each layer secure and prevents shifting.

If you are attaching heavier embellishments like pom-poms or wooden stamps, double sided tape still works well, but you may want to pair it with a dab of liquid glue for extra hold on bulky items.

What the Supplied Information Does Not Cover

The supplied details confirm that Violet Studio Double Sided Tape is suitable for card, scrapbook, and craft creations, and that it bonds invisibly with extra strong adhesive. However, the information does not specify heat resistance, archival quality, or suitability for fabric or plastic. For projects outside papercraft, test a small area first or check the manufacturer's full instructions if available.