Why Swap to the 28" Extension Arm?

The Easy Boom comes with a standard 14" arm that works well for many setups. But when you need to position a large modifier like a 7' umbrella or an oversized softbox, the extra length of the 28" extension arm gives you more clearance and flexibility. Swapping the arm is straightforward and opens up new positioning options for overhead lighting.

Swapping the Arm on Your Easy Boom

The Easy Boom Extension Arm (28") is designed to swap easily with the standard 14" arm. No special tools are needed, and the process takes just a few minutes.

  1. Remove the standard arm: Loosen the locking mechanism that secures the 14" arm to the boom. Slide the arm out and set it aside.
  2. Insert the 28" extension arm: Slide the new 28" arm into the same mounting point. Tighten the locking mechanism to secure it in place.
  3. Mount your modifier: Attach your large modifier (e.g., 7' umbrella or oversized softbox) to the end of the arm. The extra length helps keep the modifier away from the stand and subject.
  4. Adjust reach and angle: With the 28" arm, you get up to 45" of total reach. Use the boom's counterbalance and tilt adjustments to fine-tune the position for your shot.

What the Extension Arm Offers

  • Easy Boom Extension Arm (28"): Swaps easily with the standard 14” arm on your Easy Boom You don't need a new boom or additional adapters—just this arm to upgrade your existing setup.

    Easy Boom Extension Arm (28")

    Easy Boom Extension Arm (28")

  • Easy Boom Extension Arm (28"): Ideal for mounting large modifiers like 7’ umbrellas and oversized softboxes Large modifiers need extra clearance to avoid casting shadows or hitting the stand. The 28" arm provides that space.

  • Easy Boom Extension Arm (28"): Offers up to 45” of total reach for greater positioning flexibility More reach means you can place the light exactly where you need it, whether for overhead key light or a high hair light.

  • Easy Boom Extension Arm (28"): Backed by Westcott’s 1-year pledge and lifetime US-based customer support If you have questions about setup or compatibility, Westcott's support team can help.

Practical Considerations for Overhead Lighting

When using the 28" extension arm for overhead lighting, remember that the longer arm increases the leverage on the boom. Make sure your light stand is stable and properly counterbalanced, especially with heavy modifiers. The arm itself is built for the Easy Boom system, so it fits securely without wobble.

The 28" extension is particularly useful for overhead butterfly lighting or when you need to position a large softbox directly above a tabletop subject. The extra reach helps keep the stand out of the frame and gives you more control over the light angle.