Quick answer

The Sebra Mobile and Canopy Holder lets you attach a baby mobile or the Sebra Sky Canopy to your crib, playpen, or other slatted furniture in minutes using two padded clamping discs.

Why use a dedicated holder instead of DIY solutions?

A purpose-made holder like the Sebra Mobile and Canopy Holder clamps securely without damaging furniture. DIY alternatives (tape, string, or non-rated arms) can slip or tip, creating a hazard near your baby. The holder's padded discs protect surfaces while providing a stable anchor for mobiles or canopies.

Mobile vs. canopy: what fits on the holder?

The holder works with any standard baby mobile that hangs from a single point. It also directly accepts the Sebra Sky Canopy, which clips onto the holder's arm. You can use both at once: hang a mobile from the arm and attach the canopy to the same holder. Check that your mobile's hook or ring fits the holder's attachment point before you start.

Installation steps

  1. Choose the mounting location: Select a spot on the crib rail or playpen frame where the holder's arm will be centered over the sleeping area. The holder clamps onto horizontal or vertical slats up to about 1.5 inches thick. Make sure the arm extends far enough to position the mobile or canopy directly above the center of the mattress, not off to the side.
  2. Open the clamping discs: Loosen the wing nut on the holder until the two padded discs separate enough to slide over the chosen rail or slat. Do not force them apart; they should move freely. If the discs feel stuck, check that the wing nut is fully loosened. Never use tools to pry them open.
  3. Position and tighten the holder: Place the holder so the arm points toward the center of the crib. Tighten the wing nut by hand until the discs grip the rail firmly and the holder does not slide or rotate when you tug gently. Over-tightening can crack the wood or damage the padding. Stop as soon as the holder is stable.
  4. Attach the mobile or canopy: Hang the mobile's hook over the holder's arm or clip the Sebra Sky Canopy onto the designated attachment point. Ensure the mobile hangs freely without touching the canopy or the crib sides. Test that the mobile spins or sways without catching on anything. For canopies, confirm the fabric does not drape into the crib.
  5. Perform a safety check: Gently pull the mobile or canopy from different angles to confirm the holder stays put. Check that all strings, ribbons, or fabric parts are out of baby's reach and above the crib's highest rail. Repeat this check every time you change the bedding or adjust the mobile position. Children grow fast, and reach changes.

Product facts

  • Uro-og sengehimmelholder - Sebra Sleep - Classic White: Made from eco-labeled wood with two padded clamping discs that protect the furniture surface. The padded discs let you tighten the holder securely without scratching or denting the crib or playpen frame.

    Uro-og sengehimmelholder - Sebra Sleep - Classic White

    Uro-og sengehimmelholder - Sebra Sleep - Classic White