Start with the fabric blend

The Figtastic Tee - Maroon is a tri-blend of 50% polyester, 25% combed ring-spun cotton, and 25% rayon. That mix gives it a feather-light feel at 3.4 oz/yd2 (115.3 g/m2) and a broken-in softness. Because the fabric is lightweight and pre-shrunk, it responds well to gentle washing—but the maroon color and the printed graphic still need protection from heat and agitation.

There are no care instructions in the supplied product record, so the steps below are general best practices for tri-blend graphic tees, not manufacturer mandates. Use them as a starting point and always check any label that comes with your tee.

Figtastic Tee - Maroon at a glance

  • Figtastic Tee - Maroon: 50% polyester, 25% combed ring-spun cotton, 25% rayon; 3.4 oz/yd2 (115.3 g/m2) This blend is lightweight and soft, so it needs a gentle wash cycle to avoid excess wear.

    Figtastic Tee - Maroon

    Figtastic Tee - Maroon

  • Figtastic Tee - Maroon: Pre-shrunk for a just-right fit that lasts; regular fit with a broken-in, ultra-soft finish Pre-shrinking helps limit shrinkage, but high heat can still affect fit over time.

  • Figtastic Tee - Maroon: Side-seamed construction for extra durability Side seams help the tee hold its shape, but turning it inside out protects the graphic during washing.

A simple washing routine for the maroon tee

Follow these steps each time you wash the tee to reduce fading and keep the graphic intact.

  1. Turn the tee inside out: This puts the graphic against itself rather than against other garments, reducing abrasion that can dull the print.
  2. Use cold water on a gentle cycle: Cold water is gentler on dyes and fibers. Choose a delicate or gentle cycle if your machine has one.
  3. Wash with similar colors: Maroon can bleed slightly in the first few washes. Washing with other darks or alone helps prevent color transfer.
  4. Skip fabric softener and bleach: Fabric softener can leave residue that affects the fabric’s feel, and bleach will damage the color.
  5. Use a mild detergent: A gentle, color-safe detergent is less likely to strip dye than harsh or enzyme-heavy formulas.

Drying without fading

Heat is the enemy of both maroon dye and graphic prints. The safest approach is to air-dry the tee. Lay it flat on a clean towel or hang it on a plastic hanger in a shaded spot. Direct sunlight can cause fading over time, so keep it out of strong sun.

If you must use a dryer, choose the lowest heat setting and remove the tee while it’s still slightly damp. High heat can also affect the pre-shrunk fit, so avoid it when possible.

Figtastic tee laundry tips to remember

  • Wash less often: Tri-blend tees can often be worn more than once between washes if they don’t smell or show stains. Air them out between wears.
  • Treat stains promptly: Blot stains with a damp cloth and a little mild detergent. Avoid rubbing, which can spread the stain or damage the fabric.
  • Avoid wringing: Don’t twist or wring the tee after washing. Gently squeeze out excess water instead.
  • Store folded: Hanging a lightweight knit can stretch the shoulders over time. Folding helps maintain the regular fit.

What the product record does not cover

The supplied information for the Figtastic Tee - Maroon does not include specific care instructions, drying recommendations, or ironing guidance. The steps above are general practices for similar tri-blend graphic tees, not official manufacturer instructions. If your tee arrives with a care label, follow that label first.

With a little care, your maroon tee can stay rich in color and soft in feel through repeated wears. The key is to keep heat low and agitation gentle.