Quick answer
Place each HUNTER X HUNTER sitting figure on a flat, stable surface away from direct sun and heat, then dust gently with a soft brush and keep handling to a minimum. For the 15cm sitting set, check that the pose rests fully on the ledge or shelf before letting go.
Why sitting figures need a different placement check
Sitting figures rely on a broad contact area rather than a stand, so a slight tilt or a glossy surface can let them slide over time. Before you decorate, test the spot with a gentle nudge: if the figure shifts easily, add a small piece of museum putty or a non-slip pad under the base.
Small shelves and ledges also expose figures to more accidental bumps than a closed cabinet. Keep the most frequently handled items, like keys or remote controls, on a different shelf so your HUNTER X HUNTER figure set stays put.
Light, heat, and the trade-off of open display
Open shelves look great but expose PVC to dust and UV light. A spot away from windows and heat vents will slow color fading and keep the material from softening. If your only option is a bright windowsill, rotate figures every few weeks or use a UV-filtering film on the glass.
Enclosed cabinets reduce dust but can trap heat if placed near a radiator. Check the temperature by touch before storing figures inside.
Step-by-step placement and care routine
- Choose a stable, low-traffic surface: Pick a flat shelf, desk corner, or ledge that is not in a walkway and not above a heat source. Place the figure down and give it a light nudge; if it rocks or slides, move it or add a non-slip pad. A figure that shifts with a gentle nudge will eventually fall.
- Test the pose contact: For each sitting figure, check that the base and any contact points rest fully on the surface. On narrow ledges, position the figure so its center of gravity is over the shelf, not over the edge. If the figure overhangs the edge, move it back before decorating around it.
- Group the set with breathing room: Arrange the six figures so they do not touch each other or nearby objects. Leave at least a finger-width between figures to avoid paint rubbing and to make dusting easier. Crowding increases the chance of accidental knocks during cleaning.
- Dust gently on a schedule: Use a clean, soft makeup brush or a microfiber cloth to dust each figure weekly. Work from top to bottom and support the figure with your free hand so it does not tip. Never use paper towels or abrasive cloths, which can scratch the PVC.
- Handle with clean, dry hands: When you move a figure, lift it by the base rather than the head or limbs. Wash and dry your hands first to avoid transferring oils or dirt. Oils from skin can dull the finish over time.
- Rotate and inspect monthly: Every month, check for loose joints, sticky residue, or fading. Rotate figures to different spots if one area gets more light, and clean any sticky spots with a slightly damp cloth, then dry immediately. Early inspection catches stability problems before a figure falls.
Product facts
-
Hunter x Hunter 15cm Sitting Figures: The set includes six characters (Gon, Killua, Kurapika, Hisoka, Chrollo, and Illumi) in a noodle-stopper pose designed to sit on ledges, cup lids, and bookshelves. Because each figure is designed to rest on narrow edges, test the balance point on your shelf before walking away.
Hunter x Hunter 15cm Sitting Figures