Why Hybrid Volume Pre-Glued Individuals Suit a Fast Full Look

Hybrid Volume Pre-Glued Individuals from our 1-Step Press range are designed for a medium glam style that adds dimension and depth without overpowering the eye. Each cluster has a pre-glued base, so there is no adhesive to apply and no drying time to wait for. That makes them a practical choice when you want a full, textured lash look without a lengthy routine.

The clusters are CC Curl with a knot-free, clear band that blends with your lash line. They come in lengths of 10mm, 12mm, and 14mm, and each pack contains 3 rows of clusters—enough for up to 5 full applications according to the product information. The pre-glued base is latex free.

What You Get in a Pack

How to Apply Hybrid Volume Pre-Glued Individuals

Follow these steps for a seamless application. The process is designed to be beginner-friendly, but a patch test is recommended before first use.

  1. 1. Prepare your natural lashes: Curl your lashes before applying for a seamless blend.
  2. 2. Remove the cluster from the packaging: Gently remove the lashes from the packaging using the lash applicator or your finger, as close to the base as possible.
  3. 3. Pick up the cluster: Using your 1-Step Press Applicator, pick up the cluster close to the base of the lash. Avoid touching the pre-glued base or the glue tape at the bottom of the cluster, and avoid the applicator touching the glue as this will stick to the applicator.
  4. 4. Place the cluster: Place the cluster underneath your natural lashes, then lift the cluster in an up-and-out motion against the root of your lashes, leaving around a 2mm gap from your lash line.
  5. 5. Clamp for security: Once all lashes are applied, use the 1-Step Press Applicator to clamp down the lashes, focusing on the base of your natural lash line where the clusters are applied. Ensure you clamp thoroughly to lock the lashes securely into place for a longer lasting hold. You can re-clamp anytime to secure them further.
  6. 6. Allow setting time: Allow 24 hours setting time for the adhesive to fully set. According to the product details, the lashes can last up to 10 days with proper care.

Tips for a Seamless Hybrid Volume Look

To customize your look, mix the 10mm, 12mm, and 14mm clusters. Use shorter lengths near the inner corner and longer ones toward the outer corner for a subtle cat-eye effect, or distribute them evenly for a rounded, wide-eyed shape. The medium glam style of Hybrid Volume means you can build dimension without an overly dramatic finish.

Remember to avoid touching the pre-glued base during application. If you need to adjust a cluster, use the applicator rather than your fingers to prevent the adhesive from sticking to your skin.

How to Remove and Reuse the Clusters

Proper removal keeps your natural lashes safe and allows you to reuse the clusters with a separate adhesive.

  1. 1. Apply remover: Gently brush the remover wand from the 1-Step Press Remove & Nourish (coated with product) along your lashes and clusters, focusing on the areas where the glue band connects with your natural lashes. Wait for 30 seconds for the remover to dissolve the adhesive.
  2. 2. Slide off the clusters: Use a cotton pad to gently slide the clusters away from your lashes, using a downward motion.
  3. 3. Remove residue: Brush through your lashes again using the remover wand and remove any final residue with a cotton pad. If residue remains, soak cotton buds in the removal solution and brush through any remaining glue on your lashes.
  4. 4. Clean the clusters: Peel away the pre-glued lash band and clean the clusters thoroughly using our Lash Cleansing Kit. Allow the clusters to dry.
  5. 5. Reuse: Once dry, you can reuse the clusters with Invisi-Lash adhesive or Strip Lash adhesive.

Safety and Compatibility Notes

The product information recommends carrying out a patch test prior to using this product. The pre-glued base is latex free, but if you have sensitive eyes or known allergies, always test first. The glue ingredients are listed as Pentaerythrityl Rosinates, Paraffinum Liquidum, Styrene/Isoprene Copolymer, Boswellia Carterii Gum Extract, and Pentaerthrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate.

These clusters are designed for use with the 1-Step Press Applicator and Remove & Nourish for best results. If you plan to reuse them, ensure they are thoroughly cleaned and dried before applying a new adhesive.