What the Y-Pipe Kit Replaces on Your 370Z

The REMARK Y-Pipe Kit (part number RO-YPQ5-N) replaces the factory Y-pipe section on 2009+ Nissan 370Z models. This is the section that merges the two exhaust streams from the midpipe into a single pipe before the rear mufflers. On a stock system, the factory Y-pipe is typically made of mild steel with tighter bends and smaller diameter piping, which can restrict exhaust flow and dull sound quality.

Upgrading to the REMARK Y-Pipe Kit is a direct bolt-on replacement—no cutting or welding required—when paired with either a REMARK Midpipe kit or the factory OEM exhaust. The kit includes a flex pipe for accurate fitment, and the entire assembly is mandrel bent from T304 stainless steel piping. Follow the supplied product instructions for proper installation.

Stock Y-Pipe vs REMARK Y-Pipe: Key Differences

The following comparison highlights the main differences between the stock Y-pipe and the REMARK Y-Pipe Kit based on supplied specifications.

  • Piping Material: Stock: Mild steel (prone to rust over time). REMARK: Full T304 stainless steel—corrosion resistant and longer lasting.
  • Piping Diameter & Bends: Stock: Typically 2.0" or smaller with crush bends. REMARK: 2.5" mandrel bent piping, which maintains consistent diameter through bends for smoother exhaust flow.
  • Flex Pipe: Stock: Usually no flex section, which can transmit more vibration and stress to the exhaust system. REMARK: Includes two flex pipes to absorb chassis movement and reduce stress on connections.
  • Fitment: Stock: Vehicle-specific, but often requires cutting or welding for aftermarket upgrades. REMARK: Direct bolt-on to REMARK Midpipe kit or factory OEM exhaust—no modifications needed.

REMARK Y-Pipe Kit Specifications

  • Y-Pipe Kit - Nissan 370Z: Part Number: RO-YPQ5-N, fits 2009+ Nissan 370Z. Confirms exact vehicle compatibility before purchase.

    Y-Pipe Kit - Nissan 370Z

    Y-Pipe Kit - Nissan 370Z

  • Y-Pipe Kit - Nissan 370Z: Piping diameter: 2.5" mandrel bent T304 stainless steel. Mandrel bending preserves internal diameter for better flow vs. stock crush bends.

  • Y-Pipe Kit - Nissan 370Z: Includes two REMARK flex pipes. Helps the Y-pipe fit accurately and reduces stress from engine movement.

  • Y-Pipe Kit - Nissan 370Z: Direct bolt-on to REMARK Midpipe kit or factory OEM exhaust. No cutting or welding required—installation is straightforward for a DIY owner.

What the Upgrade Means for Sound and Performance

Switching to the REMARK Y-Pipe Kit can change the exhaust note by reducing restriction at the merge point. The mandrel bends allow exhaust gases to exit more freely, which typically results in a deeper, more aggressive tone compared to the stock Y-pipe. Because the Y-pipe is positioned before the axleback, the sound change is noticeable but not overwhelming—it complements both the REMARK axleback and midpipe kits.

Keep in mind that the Y-pipe alone does not replace the midpipe or muffler section. If you are looking for a full exhaust overhaul, this kit is one step in a modular system. For the best results, REMARK recommends pairing it with their 370Z Axleback and Midpipe Kit, all of which are designed to work together.

Installation and Important Notes

Installation is direct bolt-on, but you should still follow the product's disclaimer and warranty terms before ordering. The Y-Pipe Kit is covered by REMARK's limited warranty when purchased from www.remark-usa.com, and no returns or exchanges are accepted once the kit is shipped—so double-check that your 370Z is a 2009+ model and that you plan to use it with a compatible midpipe setup.

All hardware is included, but you may need to reuse your existing gaskets or purchase new ones separately, as gaskets are not mentioned in the supplied kit contents. If you are unsure about fitment with a non-REMARK midpipe, consult the product record or contact REMARK directly before purchasing.