Before You Assemble the Thruway 60W

The Ingenuity Thruway 60W Series stroller arrives with assembly required, so set aside a clear space and a few minutes before your first outing. The box includes the stroller frame, seat, canopy, and wheels, along with the hardware and tools you need for basic setup. No batteries are required.

Before you start, check that you have a Phillips-head screwdriver and the included Allen wrench. The instructions are straightforward, but pay attention to the order of steps—especially when attaching the wheels and canopy—to avoid having to backtrack.

Assembling the Thruway 60W Series Stroller

  1. Unfold the frame: Lift the frame until it clicks into place. Make sure both side latches are fully engaged before proceeding.
  2. Attach the rear wheels: Slide each rear wheel axle into its housing until it locks. Pull gently to confirm it's secure.
  3. Attach the front wheels: Insert the front wheel assemblies into the frame mounts. They should click into place and swivel freely.
  4. Install the seat: Align the seat connectors with the frame slots and push down until you hear a click. Tug upward to verify it's locked.
  5. Attach the canopy: Clip the canopy onto the frame posts on both sides. It should rotate smoothly and stay in position.
  6. Check the harness: Before first use, adjust the harness straps to fit your child. See the harness adjustment section below.

Adjusting the Harness for a Secure Fit

A properly adjusted harness keeps your child safely in the seat. The Thruway 60W uses a five-point harness with a central buckle. To adjust, first unbuckle the harness and lay the straps flat. From the back of the seat, thread the upper shoulder straps through the slots that align with your child's shoulders—at or slightly below shoulder height. Then, from the front, slide the strap ends through the buckle tongues until they click.

With your child seated, tighten the straps by pulling the adjustment strap at the front of the seat until the harness fits snugly against their body. You should be able to slide one finger between the strap and your child's chest. The buckle should sit flat against the torso, not over the stomach. Always double-check that all five points are secure before you start walking.

Using the One-Hand Fold

The Thruway 60W Series features a one-hand fold mechanism, which is handy when you're holding your child or managing a bag. To fold, first remove your child and any items from the seat. Then, locate the fold handle or strap under the seat or on the frame (refer to your specific model's instructions). Pull upward firmly while pushing the stroller forward. The frame should collapse and lock into a compact standing position.

To unfold, simply lift the handle until the frame clicks into place. Always ensure the stroller is fully open and locked before placing your child inside.

First-Ride Tips for the Thruway 60W

Before your first outing, take a few minutes to test the stroller empty. Push it around your home or driveway to get a feel for the steering and brakes. Engage the rear brake pedal to confirm it holds the stroller securely. Then, with your child buckled in, practice walking on flat surfaces first. Keep the canopy adjusted for sun protection, and use the storage basket for small items only—avoid hanging bags from the handlebar, as this can affect stability.

For longer walks, check that the seat is in a comfortable recline position. The Thruway 60W allows multiple recline angles; adjust before you start moving. And always engage the brake when you stop, even for a moment.

Key Specifications at a Glance

Care and Maintenance

To keep your Thruway 60W Series stroller in good condition, wipe the frame and fabric with a damp cloth as needed. Avoid harsh cleaners or abrasive materials. Periodically check that all screws, bolts, and wheel attachments are secure. If you notice any loose parts, tighten them before use. Store the stroller in a dry place when not in use, and avoid leaving it in direct sunlight for extended periods to prevent fabric fading.