What the 4-piece set covers
The RT-TCZ rear tail light lamp cover trim is a set of four pieces designed to fit the rear tail light housings of a 2017–2025 Jeep Compass. Each piece is made from ABS plastic with a self-adhesive backing, and the set comes in a Smoked Black color option. The trim adds a finished, slightly upscale look to the factory tail light bezels without requiring any permanent modification.
Installation steps as supplied
The following steps are based on the manufacturer's supplied instructions. The process is designed to be done without professional tools.
- Step 1: Clean the surface: Thoroughly clean the installation area on each tail light housing. Make sure the surface is dry and free of dust, wax, or any residue. Any contamination can reduce the adhesive bond.
- Step 2: Peel the backing: Peel off the backing from the self-adhesive tape on each trim piece. Avoid touching the adhesive with your fingers to keep it clean.
- Step 3: Warm the adhesive if needed: If the ambient temperature is below 15°C (59°F), use a heat gun or hairdryer to warm the adhesive for improved bonding. Warm the tape evenly; do not overheat the plastic trim.
- Step 4: Press firmly for 2–3 minutes: Position the trim piece on the tail light housing and press it firmly for 2–3 minutes to ensure a secure initial bond. Pay extra attention to the edges.
- Step 5: Keep dry for 48 hours: After installation, keep the installed area dry for the first 48 hours. Avoid car washes, rain, or high-pressure water near the trim during this period so the adhesive can fully cure.
Removal and residue
The adhesive is designed to be removable without leaving residue. If you need to reposition or remove a piece, the listing notes that the adhesive can be easily removed and will not leave sticky residue behind. This makes the trim a low-risk upgrade if you later decide to revert to the factory look.
Product details at a glance
-
For 2017-2025 Jeep Compass Rear Tail Light Lamp Cover Trim (4 pcs): Material: ABS. Manufacturer Warranty: 1 Year. Package includes 4 pieces. ABS is a common automotive-grade plastic with good weather and impact resistance. The one-year warranty covers defects, and the four-piece count matches the number of rear tail light housings on a standard Compass.
For 2017-2025 Jeep Compass Rear Tail Light Lamp Cover Trim (4 pcs)
-
For 2017-2025 Jeep Compass Rear Tail Light Lamp Cover Trim (4 pcs): Available color: Smoked Black. Smoked Black is the only color option confirmed in the listing. If you need a different shade, you will need to confirm availability before ordering.
-
For 2017-2025 Jeep Compass Rear Tail Light Lamp Cover Trim (4 pcs): Fitment: 2017–2025 Jeep Compass. Confirm your car's part matches the picture. The set is designed for the Compass model range, but the listing advises double-checking the shape of your tail light housing against the product image. The same model year can have regional variations.
What the listing does not cover
The supplied instructions do not specify a recommended torque, adhesive type, or temperature range beyond the 15°C warming note. There is no mention of UV resistance testing or long-term color change. If you live in an area with extreme sun or frequent temperature swings, the ABS material should hold up, but the listing does not provide specific durability data for those conditions. The fit check (matching your housing to the product photo) is your responsibility before ordering.



