Quick Answer

Install the Perifo L-shaped ceiling base kit with 3 spots by first planning the layout, then mounting the rails, connecting the spots, and wiring to the power supply. Follow the steps below for a safe and successful installation.

Why Choose the L-Shaped Configuration?

The L-shaped layout lets you run track lighting around a corner, which is ideal for kitchen islands, breakfast bars, or U-shaped counters. It provides even illumination across two perpendicular zones while keeping a single power connection point.

Compared to a straight run, the L-shape requires an extra corner connector and careful measurement to ensure the rails align perfectly. Plan the exact position of the power supply and the direction of the track before you start.

Important Safety and Wiring Considerations

Before any work, turn off power at the circuit breaker. The Perifo system connects to a standard junction box; if you are not comfortable with electrical wiring, hire a licensed electrician.

The power supply unit (PSU) must be accessible after installation, so position it near the junction box. Ensure the rails are securely anchored to ceiling joists or use appropriate anchors for your ceiling type.

Step-by-Step Installation Guide

  1. Plan the layout and gather tools: Measure the ceiling area where you want the L-shape. Mark the positions of the two rails and the corner. Ensure the power supply will be within reach of the junction box. Gather a screwdriver, drill, level, pencil, and wire connectors. Double-check that the corner angle is exactly 90 degrees to avoid misalignment.
  2. Turn off power and prepare the junction box: Switch off the circuit breaker that feeds the ceiling light. Remove the existing fixture and disconnect the wires. If the junction box is recessed, use a box extension to bring it flush with the ceiling surface. Use a voltage tester to confirm no power is present before touching any wires.
  3. Mount the first rail: Position the first rail along your marked line, ensuring it is level. Drill pilot holes and secure the rail with the provided screws and anchors (if needed). The rail should be firmly attached to the ceiling. Check level both along the rail and across its width to prevent a tilted look.
  4. Attach the corner connector and second rail: Connect the corner connector to the end of the first rail, then slide the second rail into the connector at a 90-degree angle. Secure the connector as per the instructions, then mount the second rail to the ceiling, ensuring it is level. Temporarily support the second rail while securing to avoid stress on the connector.
  5. Insert the spotlights into the rails: Slide the three cylinder spotlights into the track at your desired positions. Ensure they click into place and are oriented correctly. Adjust the spot heads to aim light where needed. Test that each spotlight is locked in place by gently tugging it before finalizing.
  6. Connect the power supply and wiring: Attach the PSU to the end of one rail as indicated. Connect the PSU wires to the junction box: typically black to live, white to neutral, and green/copper to ground. Use wire nuts and ensure all connections are tight. If your wiring colors differ, consult a professional—never guess connections.
  7. Restore power and test the lights: Turn the circuit breaker back on. Use the Philips Hue app or a wall switch to power the lights. Verify all three spots illuminate and respond to app control. If any light fails, check the connection and re-seat the spotlight. If the lights do not turn on, immediately switch off power and recheck the wiring and rail connections.

Product Facts

  • Perifo straight ceiling base kit (3 spots): This ceiling track lighting kit in black includes three cylinder spotlights, two 59.1 inch rails, a PSU that sits at the end of one rail, and connectors to create a straight line. The included PSU and connectors simplify installation, but the straight-line design means you'll need to plan the L-shape with additional corner connectors (sold separately) to achieve the desired layout.

    Perifo straight ceiling base kit (3 spots)

    Perifo straight ceiling base kit (3 spots)