Before You Begin: What the Regal Dual Wall Sconce Is
The Regal Dual Wall Sconce is part of the Regal Collection, described as a post-modern linear design crafted from classic materials. It is available in a palette of rich colors and is intended as a statement piece for both contemporary and traditional interiors. While the catalog emphasizes its aesthetic role, it does not supply specific installation instructions, weight, or wiring details. This guide covers general safe practices for mounting a dual wall sconce of this type.
What the Catalog Confirms
-
Regal Dual Wall Sconce: The Regal Dual Wall Sconce is described as a post-modern linear chandelier crafted from classic materials, available in rich colors. This confirms the sconce is a substantial decorative piece, likely heavier than a simple plastic fixture. Safe installation requires appropriate wall anchors and possibly two-person mounting.
Regal Dual Wall Sconce
-
Regal Dual Wall Sconce: The sconce is part of the Luxury Wall Sconces & Lights collection and is designed to harmonize with Arm & Candle Sconces and All Lighting & Luminaires ranges. This indicates the sconce is intended for a cohesive, multi-layered lighting scheme, so placement should consider nearby fixtures for both visual balance and electrical load.
General Safe Installation Steps
Because the Regal Dual Wall Sconce lacks published installation instructions, follow these universal steps for hardwired wall sconces. Always consult a licensed electrician if you are unsure about any step.
- Turn off power at the breaker: Before touching any wires, switch off the circuit that supplies the junction box. Use a voltage tester to confirm the wires are dead.
- Prepare the junction box: Ensure the wall junction box is securely fastened to a stud or uses appropriate toggle bolts for the sconce's weight. The Regal sconce's weight is not specified, so follow the supplied product instructions to select suitable anchors.
- Connect the wiring: Match the sconce wires to the house wires: black (live) to black, white (neutral) to white, and ground (bare or green) to the grounding screw or wire. Use wire nuts and wrap with electrical tape.
- Mount the sconce base: Attach the mounting bracket to the junction box, then carefully lift the sconce into place. The dual sconce may be heavier than a single; have a helper hold it while you tighten the screws.
- Install bulbs and test: After mounting, insert the recommended bulbs (type and wattage not specified; use LED bulbs to minimize heat). Restore power and test the switch.
Placement Considerations for a Chic Look
The Regal Dual Wall Sconce is designed as a statement piece. For a balanced look, mount it at eye level in hallways, beside a mirror, or flanking a piece of art. Because the catalog notes it harmonizes with other luxury lighting, consider spacing it evenly with other sconces or chandeliers in the same room. The dual arms mean it casts light in two directions, so avoid placing it too close to a corner where one arm's light may be blocked.
What the Catalog Does Not Tell You
The supplied information for the Regal Dual Wall Sconce does not include weight, dimensions, bulb specifications, or wiring diagrams. Without these details, it is essential to handle the fixture carefully and assume it requires standard hardwiring. If you prefer a plug-in version or need specific bulb recommendations, contact Ameria Home customer support before purchasing. For safety, never exceed the wattage of a fixture you cannot confirm—use LED bulbs as a low-heat default.
