What These Visors Do for Your Compass

The ARMORDILLO® 2007-2016 Jeep Compass Tape On Window Visors are designed to let fresh air into your vehicle while helping keep rain, wind, and drafts out. They also help reduce wind noise when the windows are slightly open, improve air circulation, remove stale odors, and reduce mirror fogging. The tape-on design means no drilling is required, making installation straightforward for most owners.

Product Facts

Installation Steps

Follow these steps to install your tape-on window visors. Work in a clean, dry area and avoid direct sunlight during installation.

  1. Clean the window frame surface: Thoroughly clean the area where the visor will attach. Remove any wax, dirt, or residue. Use isopropyl alcohol if needed, and let the surface dry completely.
  2. Dry fit the visor: Hold the visor against the window frame to confirm alignment before removing the adhesive backing. Adjust as necessary.
  3. Apply the adhesive strip: Peel the backing from the included premium adhesive strip and press it onto the visor. Some visors come with the strip pre-applied; check your product.
  4. Attach the visor: Carefully position the visor on the window frame and press firmly along the entire length. Hold for several seconds to ensure good adhesion.
  5. Allow the adhesive to set: Avoid washing the vehicle or exposing the visors to heavy rain for a period after installation to let the bond strengthen.

Tips for a Clean, Lasting Fit

For best results, apply the visors when the ambient temperature is mild. Cold surfaces can reduce adhesive tack. The visors are designed to mount cleanly without drilling, so take your time positioning them correctly on the first try. Once installed, they provide a sleek exterior upgrade that blends with your Compass's lines.

What the Supplied Information Does Not Cover

The supplied information does not include specific instructions for removing old visors, nor does it specify a cure time for the adhesive. If you are replacing existing visors, carefully remove any leftover adhesive residue before installing the new ones. For detailed care or removal questions, consult a professional installer.