Before You Begin: What the Catalog Confirms

The Yale Pedestal Handleset is part of the YH Collection™, designed to offer ANSI/BHMA Grade 2 commercial quality. This means it meets a recognized standard for durability and performance in residential or light commercial use. The handleset is mechanical (no electronics), and is available in Entry and Dummy functions across three finishes: Oil Rubbed Bronze, Black Suede/Suede Black, and Satin Nickel.

Because the handleset is mechanical, installation focuses on aligning the latch, securing the exterior and interior handles, and ensuring the deadbolt (if applicable) operates smoothly. The catalog does not specify exact door thickness, backset, or crossbore dimensions, so you will need to verify these against the manufacturer's full instructions that come with the product.

Installation Steps for the Yale Pedestal Handleset

The following steps are based on typical mechanical handleset installation. Always refer to the printed manual included with your specific variant for torque specs, screw locations, and any model-specific notes.

  1. Prepare the Door: Confirm your door is pre-drilled for a handleset. The catalog does not list required hole sizes, so measure the existing bore (typically a 2-1/8" crossbore and a 1" latch bore, but verify with the included template). Remove the old lockset and clean the door edge.
  2. Install the Latch and Deadbolt (Entry Function Only): For the Entry function variant, insert the latch into the edge bore and secure it with the provided screws. The deadbolt assembly (if included with your model) goes into the main crossbore. The catalog confirms the handleset is mechanical, so no wiring or batteries are needed.
  3. Mount the Exterior Handleset: Feed the spindle through the latch mechanism and align the exterior handle with the mounting holes. Secure it from the interior side using the supplied screws. Do not overtighten, as this can bind the handle.
  4. Attach the Interior Handle: Slide the interior handle over the spindle and secure it with the provided fasteners. Test the handle movement before fully tightening. For the Dummy function variant (non-latching), the interior handle is purely decorative and does not connect to a latch.
  5. Test Operation and Adjust: Turn the handle to ensure the latch retracts smoothly. If you installed the Entry function, test the deadbolt throw. Adjust screw tension if the handle feels loose or stiff. The catalog does not specify a recommended torque, so use moderate hand-tightening.

Key Catalog Facts for Your Installation

  • Pedestal Handleset: The Yale Pedestal Handleset is part of the YH Collection™, offering ANSI/BHMA Grade 2 commercial quality. This grade indicates the handleset is built for frequent, reliable use, which is important for a front door that sees daily traffic.

    Pedestal Handleset

    Pedestal Handleset

  • Pedestal Handleset: The handleset is available in Entry and Dummy functions, and in three finishes: Oil Rubbed Bronze, Black Suede/Suede Black, and Satin Nickel. Choosing the correct function is essential: Entry for a locking door, Dummy for a non-latching application like a closet or double door. Finish selection affects aesthetics and maintenance.

What the Catalog Does Not Confirm

The catalog does not specify the exact door thickness range, backset measurement, or crossbore diameter required for the Pedestal Handleset. It also does not include installation torque values or detailed step-by-step instructions beyond the general product description. Because of this, you should rely on the printed installation manual that ships with the handleset for precise measurements and tolerances.

If your door is not pre-drilled or has non-standard dimensions, consult a professional installer or Yale customer support before drilling. The mechanical nature of this handleset simplifies installation compared to smart locks, but proper measurement is still critical for alignment and security.