Two paths to the same goal: getting electronics into your rocket
When you need to add flight computers, trackers, or sensors to a high-power rocket, you have two main options: a traditional electronic bay with a sled, or an integrated nose cone system like the IntelliCone. Both serve the same purpose, but they differ in installation, size compatibility, and the components you supply.
This comparison focuses on what the product records confirm so you can decide which approach matches your build. We'll look at the IntelliCone system (product 883881) and the Electronic Bay Sleds (product 883894), highlighting their features, limitations, and the questions you should answer before ordering.
What the IntelliCone system includes
-
IntelliCone: Includes cone, cone centering ring, threaded cap and sleeve, sled, blank cover (if sled is not in use), tube, bulkhead. This complete kit provides most of the hardware needed for an integrated nose cone avionics bay, reducing the need to source separate parts.
IntelliCone
-
IntelliCone: IntelliCones 2.56" and smaller utilize a 38mm tube; IntelliCones 3" and larger utilize a 54mm tube. The tube diameter determines the size of the electronics bay and what components will fit, so you must match it to your rocket's airframe and your electronics.
-
IntelliCone: Sled is positioned in the center of the tube and is 5"L x 1.5"W (for smaller sizes) or 7"L x 2.1"W (for larger sizes). The sled dimensions give you a clear idea of the mounting area available for flight computers and other electronics.
-
IntelliCone: A tether is not included. You'll need to supply your own tether or shock cord attachment for recovery, which is an additional consideration.
IntelliCone: integrated convenience with size-specific fit
The IntelliCone replaces a conventional payload section by integrating the electronics bay into the nose cone. It's available for LOC and PML cone types in various sizes, and you can choose the 'GUTS NO CONE' variant if you already have a cone. The system is designed to be easy to assemble and use, but keep in mind that if you use your own cone, you'll need to cut the shoulder off, and painted finishes may crack when installing the ring.
For larger IntelliCones (5.5" and up), an SCM-4 U-bolt shock cord mount is included, which simplifies recovery attachment. The sled provides ample room for flight computers, GPS trackers, lights, temperature probes, or other sensors, but the available space depends on the tube size you select.
What the Electronic Bay Sleds offer
-
Electronic Bay Sleds: All sleds are laser cut from 1/4" Baltic Birch Plywood. Baltic birch is a strong, lightweight material suitable for mounting electronics, and laser cutting ensures precise fit.
Electronic Bay Sleds
-
Electronic Bay Sleds: Sleds with a blinky set. Replace, repair, or create your own electronics bay! These sleds are versatile: you can use them to replace a damaged sled, repair an existing bay, or build a new one from scratch. The blinky set adds a visual element, though its specific function isn't detailed in the record.
-
Electronic Bay Sleds: Available in sizes: 2", 2.5", 3", 4", 5.5", 7.5". A wide range of sizes means you can match the sled to your airframe diameter, but you'll need to ensure compatibility with your specific electronic bay design.
Electronic Bay Sleds: a flexible component for custom bays
The Electronic Bay Sleds are standalone wooden sleds that you can integrate into your own electronics bay design. They are not a complete kit; you'll need to supply the tube, bulkheads, and other mounting hardware. This makes them ideal for builders who prefer a custom approach or who need to replace a worn or damaged sled.
Because they are just the sled, you have full control over the bay layout, but you also take on the responsibility of ensuring structural integrity and proper fit. The blinky set included may be useful for visual tracking or status indication, but the record doesn't specify its exact purpose, so treat it as a bonus rather than a primary feature.
IntelliCone vs Electronic Bay Sleds: key differences at a glance
- Completeness: IntelliCone is a complete system including cone, sled, tube, bulkhead, and hardware. Electronic Bay Sleds are just the sled; you supply the rest.
- Installation: IntelliCone integrates into the nose cone, often requiring cutting the cone shoulder if using your own cone. Electronic Bay Sleds are mounted inside a custom bay, giving you full control over placement.
- Size compatibility: IntelliCone is available for specific LOC and PML cone sizes, with tube diameters of 38mm or 54mm. Electronic Bay Sleds come in standard diameters from 2" to 7.5", but you must match them to your airframe and bay design.
- Electronics space: IntelliCone sled dimensions are 5"x1.5" or 7"x2.1" depending on size. Electronic Bay Sleds' dimensions are not specified in the record, so you'll need to check the product page or measure before ordering.
- Included extras: IntelliCone includes a blank cover if the sled is not in use, and larger sizes include a U-bolt shock cord mount. Electronic Bay Sleds include a blinky set, but its function is not detailed.
- Tether/shock cord: IntelliCone does not include a tether. Electronic Bay Sleds do not include any recovery hardware; you'll need to provide your own.
Which option fits your build?
If you want a turnkey solution that integrates electronics into the nose cone with minimal fabrication, the IntelliCone is a strong choice. It's particularly well-suited for builds where you want to avoid a bulky payload section and prefer a clean, streamlined profile. However, you must ensure your cone type and size are supported, and be prepared to modify your existing cone if you choose the GUTS NO CONE variant.
If you prefer a custom electronics bay or need to replace a sled in an existing bay, the Electronic Bay Sleds offer flexibility. They are also a cost-effective option if you already have the necessary tube and hardware. Keep in mind that you'll need to design and build the rest of the bay, and the sled dimensions aren't provided in the record, so verify fit before ordering.
What the records don't tell you
Neither product record includes detailed instructions for assembly or installation beyond basic descriptions. For the IntelliCone, the record mentions 'Intellicone Build Notes' but does not provide them, so you may need to consult additional resources or the manufacturer's website. For the Electronic Bay Sleds, there is no information on mounting hole patterns or hardware compatibility.
Also, the blinky set included with the Electronic Bay Sleds is not described, so its purpose and operation are unclear from the supplied information. Similarly, the IntelliCone's sled mounting options (e.g., pre-drilled holes) are not specified, so you should inspect the product or ask the seller for details.

