What the Raymon Green case is built to do

The Raymon Green case is a wood and resin snap case made for the iPhone 17. Each case is crafted individually, so the pattern on yours will be unique. The case has a protective outer rubber shell and is wireless charger compatible. That gives you a clear starting point: fit the case, check the basics, and enjoy a one-of-a-kind finish.

Confirmed details before you install

How to snap on the Raymon Green case

The supplied information does not include a step-by-step installation procedure, so the steps below are general good practice for snap-on cases. They do not override any instructions that come with your case.

  1. Start with a clean phone: Wipe the back and edges of your iPhone 17 with a soft, dry cloth to remove dust or grit before fitting the case.
  2. Align the top edge first: Press the top of the phone into the case, then work your way around the sides and bottom. The rubber shell should flex slightly as it seats.
  3. Check the camera opening: Make sure the camera cutout lines up cleanly and does not cover any lens or flash. The catalog does not list camera details, so confirm this visually.
  4. Press the edges firmly: Run your thumb around the perimeter to seat the case fully. A properly seated case should feel snug without forcing.

Fit checkpoints after installation

Once the case is on, run through these checks. They focus on what the catalog confirms and what you can verify by feel and sight.

  • Buttons: Press each button through the case. The catalog does not specify button coverage, so check that every button responds without extra effort.
  • Camera and sensors: Look at the camera area from the back and front. Ensure no part of the case blocks the lenses, flash, or any sensor. The catalog does not confirm cutout details, so this is a visual check.
  • Wireless charging: Place the phone on a wireless charger and confirm charging starts. The case is listed as wireless charger compatible, so this should work without removal.
  • Edge coverage: Feel around the sides and corners. The rubber shell should cover the edges evenly. If any corner feels loose, reseat the case.

Caring for the wood and resin finish

The Raymon Green case combines wood and resin, and each one is made individually. The supplied information does not include specific care instructions, so treat it as you would other wood-resin accessories: keep it away from prolonged moisture, wipe it with a soft dry cloth, and avoid harsh chemicals. For deeper cleaning, use a slightly damp cloth and dry immediately. These are general care suggestions, not manufacturer instructions.

What the catalog does not confirm

The supplied record does not list button covers, camera lens protection, or exact cutout dimensions. It also does not include care steps or drop-test ratings. This means you should rely on the confirmed features—rubber shell, iPhone 17 fit, and wireless charging—and check the rest yourself after installation. If any fit issue arises, reseat the case or contact the seller.