Quick answer

Choose the 22 3/8 x 47 1/2 inch belt for a JET 22-44 Plus and the 13 x 46 inch belt for a Woodtek 13-32. Both share the same aluminum oxide grain, cloth backing, and no-bump tape joint; the real decision is machine fit, and the Woodtek belt costs less.

Why the dimensions decide the purchase

These two belts are not interchangeable. The JET belt is roughly 22 inches wide by 47.5 inches long, while the Woodtek belt is 13 inches wide by 46 inches long. A feed belt that is too wide or too long will not track correctly on the conveyor rollers, and one that is too narrow leaves the workpiece unsupported.

Because the catalog does not list alternative sizes for either belt, sizing comes down to matching your sander's model. Measure your existing belt or check your manual before ordering, and treat the model name in the product title as the primary fit guide.

What you give up by choosing the cheaper belt

The Woodtek 13-32 belt is listed at USD 24.98 against a comparison price of USD 39.03, while the JET 22-44 Plus belt is USD 34.21 against USD 48.19. The price gap mostly reflects the smaller size of the Woodtek belt, not a lower grade of construction.

Both belts use premium aluminum oxide abrasive grain and a cloth backing, and both carry the same bi-directional, no-bump tape joint that the manufacturer guarantees will not stretch or break. So the trade-off is not durability between these two; it is simply whether the belt fits your machine.

When fit and tracking matter more than price

A feed belt that is slightly off in width or length can cause tracking problems that show up as wandering workpieces or edge fraying. That makes conveyor belt fit and tracking the deciding factor, not the catalog price.

If you are replacing a worn belt on a sander you already own, order the belt that matches your model exactly. If you are shopping for a new sander, factor the replacement belt size into your decision, since the two belts here serve different machine classes.

Trade-offs at a glance

  • Machine fit: The JET belt fits the 22-44 Plus; the Woodtek belt fits the 13-32. Neither belt is listed in alternate sizes, so match the model name before ordering. Measure your old belt if the model label is unclear.
  • Price: The Woodtek 13-32 belt is USD 24.98 (comparison USD 39.03); the JET 22-44 Plus belt is USD 34.21 (comparison USD 48.19). The difference tracks belt size, not build quality.
  • Construction: Both belts use premium aluminum oxide grain, cloth backing, and a bi-directional no-bump tape joint that the manufacturer guarantees will not stretch or break. Expect similar wear life from either belt when it is correctly sized.

Product facts

Which belt should you buy?

Best for

  • Owners of a JET 22-44 Plus who need an exact-fit replacement feed belt
  • Woodworkers with a Woodtek 13-32 who want a lower-cost direct replacement

Not for

  • Sanders that are not a JET 22-44 Plus or Woodtek 13-32, since no other sizes are listed
  • Buyers who need a custom width or length; measure and source a made-to-size belt instead