Two harnesses, two size ranges

The K9R M1 LightSpeed Harness comes in two versions: the standard M1 LightSpeed Harness for small to medium breeds, and the M1 LightSpeed Harness for Large Dogs. They share the same minimal, laser-cut design, but the size charts and suggested weight ranges are different. Your first decision is which version to shop, and your second is which size within that version fits your dog.

Use either your dog's weight or chest measurement to find the right fit. If those two numbers point to different sizes, go with the chest measurement, because the harness adjusts around the chest and neck rather than the whole body.

M1 LightSpeed Harness size chart (small to medium)

The standard M1 LightSpeed Harness lists four sizes. Measurements below are copied from the product record.

  • XX-Small: Chest 12"–17" (30–43 cm); neck 10.5"–15" (27–38 cm); suggested weight 5–13 lb (2.3–5.9 kg).
  • X-Small: Chest 17"–24" (43–61 cm); neck 11.5"–17" (29–43 cm); suggested weight 12–23 lb (5.4–10.4 kg).
  • Small: Chest 19"–28" (48–71 cm); neck 14"–22.5" (36–57 cm); suggested weight 22–30 lb (10–13.6 kg).
  • Medium: Chest 21"–33" (53–84 cm); neck 21"–27" (57–69 cm); suggested weight 30–60 lb (13.6–27.2 kg).

M1 LightSpeed Harness for Large Dogs size chart

The large-dog version is built specifically for large breeds. The record lists one size, Large, with the following ranges.

  • Large: Chest 26"–36" (66–91 cm); neck 22"–30" (56–76 cm); suggested weight 50–120 lb (22.7–54.4 kg).

Where the two versions overlap

The Medium in the standard M1 covers a chest of 21"–33" (53–84 cm) and a suggested weight of 30–60 lb (13.6–27.2 kg). The Large in the large-dog version covers a chest of 26"–36" (66–91 cm) and a suggested weight of 50–120 lb (22.7–54.4 kg). A dog with a chest around 26"–33" and a weight around 50–60 lb falls inside both charts.

In that overlap, the choice comes down to build and use. The large-dog version is scaled for bigger frames and has a five-point adjustment system with room for big, broad chests. The standard M1 is a tailored everyday fit for small to medium breeds. If your dog is near the top of the Medium range but has a narrow, light build, the standard M1 may still be the closer fit. If your dog is near the bottom of the Large range but has a broad, heavy chest, the large-dog version is the more likely match. The supplied records do not include a chest girth for every individual dog, so measure your own dog rather than relying on weight alone.

Fit and adjustment features that affect size choice

  • K9R - M1 LightSpeed Harness: Five-Point Adjustment System — Ergonomically contoured with a chest plate for a precise, comfortable fit. More adjustment points mean the harness can follow a dog's shape within a size range, which matters when chest and neck measurements fall in different sizes.

    K9R - M1 LightSpeed Harness

    K9R - M1 LightSpeed Harness

  • K9R - M1 LightSpeed Harness Large: Five-Point Adjustment System — Precise fit for large dogs of all builds, with room for big, broad chests. The large-dog version is built around broader chests, so a dog with a deep chest should start with this chart rather than the standard one.

    K9R - M1 LightSpeed Harness Large

    K9R - M1 LightSpeed Harness Large

  • K9R - M1 LightSpeed Harness: Two front quick-release buckles sit up front on top of the neck, making it easy to get on and off over dogs with bigger heads. If your dog has a head that is wide relative to its chest, the front buckles can make the standard M1 easier to put on without sizing up.

  • K9R - M1 LightSpeed Harness Large: Industrial-strength side buckles and metal locking hardware at the neck keep this harness secure even with strong, aggressive pullers. For strong pullers in the large-dog range, the locking neck hardware is a reason to choose the large version over stretching the standard Medium.

How to measure your dog before ordering

The product records say to use either weight or chest measurement to find the right fit. Measuring both gives you a cross-check.

  1. Measure the chest: Wrap a soft tape around the widest part of your dog's ribcage, just behind the front legs. Note the number in inches or centimeters and compare it to the chest range for each size.
  2. Measure the neck: Measure around the base of the neck where the harness collar sits. Compare it to the neck range. If neck and chest point to different sizes, the chest range is the primary guide.
  3. Weigh your dog: Use a household scale or a vet visit. Compare the weight to the suggested weight range for the size your measurements point to.
  4. Check the overlap: If your dog falls in both the Medium and Large charts, decide based on build: broad and heavy favors the large-dog version; narrow and light favors the standard M1.

What the size charts do not tell you

The supplied records do not include a recommended chest girth for every breed, a growth allowance for puppies, or a fit guide for dogs whose chest and neck measurements fall on opposite ends of a range. They also do not list an X-Large size as available; the large-dog record shows X-Large as coming soon with TBD measurements. If your dog is above the Large chest range of 36" (91 cm), the supplied information does not confirm a harness size that fits.

For dogs outside the listed ranges, contact K9R before ordering rather than guessing. The harnesses are made in the USA and backed by a lifetime warranty, but the warranty does not replace the need for a correct initial fit.