What the Karambito Scale Set Includes

The Karambito Scales set delivers a direct upgrade for your knife: a pair of black G10 scales, plus all necessary Allen bolts and hardware. This is not a full knife—just the handle components—so you will need your existing Karambito blade and frame to complete the swap.

G10 is a glass-reinforced epoxy laminate known for its durability and resistance to moisture and temperature changes. The black color gives a clean, tactical look, while the textured surface (often called Chaos Grip in Half Face Blades terminology) improves traction in wet or gloved conditions.

Installing the Scales on Your Karambito

The supplied information confirms that the set includes all required hardware, but does not provide step-by-step instructions. The following procedure is based on general knife scale replacement practices and the specific fit of this set. Always work in a clean, well-lit area.

  1. Remove the existing scales: Use a compatible Torx or Allen driver (size not specified in the product record) to unscrew the bolts holding your current scales. Keep the old hardware aside in case you need a backup.
  2. Align the new black G10 scales: Place one scale on each side of the Karambito frame, ensuring the cutouts match the blade pivot and lock mechanism. The scales are designed specifically for the Karambito model, so fit should be precise.
  3. Secure with the included Allen bolts: Thread the supplied bolts through the scale holes and into the frame. Tighten evenly in a crisscross pattern to avoid warping. Do not overtighten—snug is sufficient to avoid stripping the threads.
  4. Check function and grip: After installation, open and close the knife (if it is a folder) to confirm smooth operation. The textured Chaos Grip should feel secure in hand without sharp edges.

Product Facts

  • Karambito Scales- Black G10, Allen Bolts, Chaos Grip: Black G10 scales for a durable, textured grip. Includes a complete set of Allen bolts and hardware. Designed specifically to fit the Karambito model. Confirms that the set is a drop-in replacement with no additional purchases needed, and the texture (Chaos Grip) is built into the G10 surface for enhanced control.

    Karambito Scales- Black G10, Allen Bolts, Chaos Grip

    Karambito Scales- Black G10, Allen Bolts, Chaos Grip

What to Consider Before You Buy

The scale set is an upgrade, not a repair. If your current scales are damaged or worn, these will restore and improve the handle. However, the product record does not specify the exact bolt size or thread pitch, so if you lose a bolt, you may need to contact Half Face Blades for a replacement.

The Chaos Grip texture is aggressive—excellent for secure handling but may be less comfortable for extended carry in a pocket. G10 is also heavier than some polymer scales, though the difference on a compact knife like the Karambito is minimal.