Start with your counter, not the spec sheet
The three grinders here all dose by time and adjust steplessly, so the real decision comes down to physical fit, hopper routine and how much programmability you want. Measure your counter depth and height clearance first. The Lelit PL71 is the smallest at 140 × 225 × 365mm, the Ascaso H64 is 140mm wide × 180mm deep × 355mm high, and the Profitec Pro T64 is the largest at 170mm wide × 250mm deep × 430mm high. If your cabinets are low, the Profitec's 430mm height is the first constraint to check.
Footprint and hopper capacity at a glance
-
Lelit PL71 Coffee Grinder: Dimensions: 140 × 225 × 365mm; hopper: 350g with stainless steel lid The smallest body and a mid-size hopper suit tight counters and a few espressos a day.
Lelit PL71 Coffee Grinder
-
Ascaso H64 Coffee Grinder: Dimensions: 140mm wide × 180mm deep × 355mm high; hopper: 300g and single-dose antistatic hopper The shallowest depth and a single-dose hopper option favor small kitchens and low-retention routines.
Ascaso H64 Coffee Grinder
-
Profitec Pro T64 Magnetic Coffee Grinder: Dimensions: 170mm wide × 250mm deep × 430mm high; hopper: approximately 550g, tinted The largest footprint and hopper capacity fit a dedicated coffee station and higher-volume mornings.
Burr size and motor: what changes in the cup and the routine
The Lelit PL71 uses 50mm flat burrs and a 270W motor, while the Profitec Pro T64 and Ascaso H64 both use 64mm flat burrs (stainless steel on the Profitec, tempered steel on the Ascaso). Larger burrs generally grind faster, and the Ascaso lists a grinding speed of 2.3–2.5g/s; the Lelit lists 1g/s at espresso fineness. That difference matters if you pull several shots back to back. The Profitec's 450W motor is the highest wattage in this group, but the supplied information does not give a grinding speed for it, so judge it on burr size and dosing rather than an assumed speed.
Burrs and motors compared
- Lelit PL71 Coffee Grinder: 50mm flat burrs; motor: 270W; production: 1g/s at espresso fineness A slower grind is fine for one or two drinks, but may feel slow when making rounds for guests.
- Ascaso H64 Coffee Grinder: 64mm tempered steel flat burrs; motor: 245W, 1650RPM; grinding speed: 2.3–2.5g/s Large burrs and a listed speed make it the clearer choice for frequent back-to-back shots.
- Profitec Pro T64 Magnetic Coffee Grinder: 64mm stainless steel burrs; motor: 450W, 1400RPM The largest motor and burrs point to a grinder built for steady use, though speed is not specified.
Dosing controls: timed, programmable or manual
All three offer stepless adjustment, so you can dial in espresso without steps. The difference is how you repeat a dose. The Lelit PL71 has two timer settings and a manual dosing button. The Ascaso H64 goes further with three programmable doses and a continuous grinding mode. The Profitec Pro T64 offers programmable single and double doses plus manual grinding, with timed dosing adjustable to one tenth of a second. If you switch between a single espresso and a double basket, the Profitec's fine timing control is the most precise on paper; if you often grind for filter or a full bag, the Ascaso's continuous mode is a practical addition.
Dosing features that affect daily use
- Profitec Pro T64 Magnetic Coffee Grinder: Dosing: programmable single and double doses plus manual grinding; timed dosing adjustable to one tenth of a second Fine timing helps repeat the same dose when you change baskets or coffees often.
- Lelit PL71 Coffee Grinder: Dosing: two timer settings and manual dosing button; adjustable chute height and stainless steel portafilter holder Simple timed dosing and an adjustable fork suit one or two familiar baskets.
- Ascaso H64 Coffee Grinder: Dosing: three programmable doses and continuous grinding mode; electronic display with espresso dose counter More presets and a counter help if multiple people use the grinder or you track doses.
Workflow details: forks, trays and single dosing
The Lelit PL71 includes an adjustable chute height and a stainless steel portafilter holder, plus a magnetic grinds catch tray. The Ascaso H64 ships with both a standard hopper and a single-dose antistatic hopper, which is useful if you alternate between filling the hopper and weighing individual doses. The Profitec Pro T64 has magnetic side panels and a tinted hopper, but the supplied information does not list a portafilter fork or a single-dose accessory, so check those details if they are essential to your routine.
Accessories and build notes
- Lelit PL71 Coffee Grinder: Body: satin stainless steel; tray: magnetic grinds catch tray; chute and fork: adjustable chute height and stainless steel portafilter holder A magnetic tray and adjustable fork reduce mess and fit different portafilter heights.
- Ascaso H64 Coffee Grinder: Standard hopper and single-dose antistatic hopper included; body: compact; available in Black or White Two hopper styles and a colour choice help match your counter and dosing style.
- Profitec Pro T64 Magnetic Coffee Grinder: Body: polished aluminium; magnetic side panels; hopper: approximately 550g, tinted A large tinted hopper and polished body suit a visible, high-volume setup.
Which grinder fits your home setup?
Choose the Lelit PL71 if counter space is tight, you make a few drinks at a time, and you prefer simple timed dosing with a portafilter fork. Choose the Ascaso H64 if you want 64mm burrs in the smallest depth here, value three programmable doses and a continuous mode, and like the option of single dosing. Choose the Profitec Pro T64 if you have the height and depth for a larger grinder, want the biggest hopper and motor in this group, and need precise tenth-of-a-second dose timing. None of the supplied records include care instructions or voltage compatibility beyond the Profitec's listed 240V/50Hz supply, so confirm those details for your region before buying.
