Quick Answer
The LensCoat Katana Gimbal Head cover fits snugly over your gimbal head to protect against bumps, temperature, and wildlife detection. Proper installation and periodic care keep it effective.
Why a snug fit matters for protection
A loose cover can shift during use, leaving parts of your gimbal head exposed or interfering with smooth pan-and-tilt movement. The closed-cell neoprene material is designed to stretch slightly for a secure fit, but it needs to be aligned correctly on the head's contours.
If the cover feels too tight after installation, it may compress the neoprene unevenly, reducing its thermal barrier effect and making it harder to remove for cleaning. A proper fit balances snugness with easy removal.
Cleaning without damaging the neoprene
Dirt and salt residue from outdoor use can degrade the neoprene over time. Hand wash the cover in cold water with mild soap, then air dry away from direct heat. Avoid machine washing, bleach, or fabric softeners, which can break down the closed-cell structure and reduce thermal protection.
Diagnosis: Common Fit and Care Issues
- Symptom: Cover slides or rotates on the gimbal head during use.
- Likely Cause: The cover was not stretched evenly over the head's widest points, or the color/size variant does not match the head model. Check that you have the correct cover for your specific gimbal head model.
- Corrective Action: Remove the cover, realign it so the cutouts match the head's knobs and base, then pull it on from the bottom edge first, working upward. If it still shifts, the cover may be the wrong size. If the cover remains loose after reinstallation, consider exchanging it for a different size or model.
- Stop or Choose Another Option: If the cover shows tears, stretched-out sections, or permanent discoloration after cleaning, replace it. Damaged neoprene no longer provides reliable protection or thermal insulation. Inspect the cover every few months for wear, especially around the edges and knob cutouts.
Product Facts
-
LensCoat® Katana Gimbal Head cover: The LensCoat GK Katana Gimbal Head cover is made of closed-cell neoprene and acts as a thermal barrier, protecting your hands in hot and cold temperatures. This means the cover not only guards against scrapes but also keeps your grip comfortable during long shoots in extreme weather.
LensCoat® Katana Gimbal Head cover