Quick answer
The LensCoat Sony Teleconverter Set fits securely over your 1.4x and 2x extenders, shielding them from scrapes and bumps. For best results, clean the extender surface before installation and avoid stretching the cover over sharp edges.
Why a teleconverter cover matters
A teleconverter is often the most vulnerable piece of gear in your bag because it lacks the robust barrel of a lens. The LensCoat Teleconverter Set adds a protective layer that absorbs light impacts and preserves resale value. It also breaks up the shape of the extender, making your setup less noticeable to wildlife—a bonus for nature photographers.
The set includes covers for both the Sony 1.4x and 2x extenders, so you can protect whichever extender you use without buying separate kits.
Trade-offs to consider
While the cover fits snugly, it adds a small amount of thickness that may make it slightly harder to slide the extender into a tight lens case. If you frequently swap extenders in the field, the extra step of removing and reapplying the cover could slow you down. For most users, the protection outweighs this minor inconvenience.
Fit and care diagnosis
- Symptom: Cover feels loose or shifts during use: Likely cause: The extender surface was dusty or oily when you applied the cover. Clean the extender with a mild alcohol wipe and let it dry completely before reapplying. The cover relies on friction, so a clean surface is essential. Reapply after cleaning; if still loose, check that you are using the correct cover for your extender model (1.4x vs 2x).
- Symptom: Cover tears or shows stress marks near the lens mount: Likely cause: You stretched the cover over a sharp edge or forced it into position. Remove the cover and inspect it for damage. If it is intact, reinstall by starting at the mount end and gently rolling the cover over the extender body. If the cover is torn, stop using it and order a replacement. Do not attempt to repair tears with tape.
- Symptom: Cover does not align with the extender's markings or controls: Likely cause: The cover was rotated during installation. Remove it, align the cutouts with the extender's buttons and markings, then press the cover into place from the center outward. Once aligned, the cover should not block any controls. If it still obstructs, the cover may not be fully seated; remove and try again.
Product facts
-
LensCoat® Sony Teleconverter Set: The LensCoat Extender set includes a cover for the Sony 1.4 and 2.x extenders. You get a tailored fit for both common Sony teleconverter models, so you don't need to buy separate covers.
LensCoat® Sony Teleconverter Set
-
LensCoat® Sony Teleconverter Set: LensCoat lens covers offer your valuable equipment some protection from scrapes and bumps, preserving its resale value. A teleconverter is an investment; the cover helps it look newer longer, which matters if you ever sell or trade it.
-
LensCoat® Sony Teleconverter Set: LensCoat covers help break up the shape of your lens, making it less noticeable to wildlife. The textured, non-reflective surface reduces glare and disguises the extender's outline, helping you get closer to skittish subjects.