Start with the silencing design, not the color

The Berry Cheesecake is a silent linear switch from Wingtree Lichicx. Its quiet operation comes from a custom stem paired with a silicone silencer, which is designed to reduce volume while keeping a clean bottom-out feel. That matters for an office keyboard because the goal is not just less noise but a bottom-out that still feels deliberate rather than mushy.

Because the switch is factory lubed, you can plan a build without adding your own lubricant. The stem legs and sliders have a very thin coat of 205g0, the spring and leaf use dry film, and the bottom housing and the area near the stem pole are left dry. That combination is intended to lower the chance of lube pooling, so the switch should feel consistent out of the pack.

What the factory lube actually covers

Choose the spring weight before you buy a full set

The Berry Cheesecake comes in two spring options: a 35g–42g version and a 45g–53g version. The lower range is the lighter choice, while the higher range adds resistance. Both use an 18mm KOS single-stage spring for the lighter option and a 16mm KOS single-stage spring for the heavier one. If you are moving from a standard office membrane keyboard, the lighter spring may feel closer to what you are used to, but the heavier spring can suit typists who prefer more pushback.

The listing does not state which spring weight is best for a given hand size or typing style, so treat this as a personal preference decision. A 10pcs pack is a practical way to test one weight in a few key positions before committing to a full board.

Spring and travel specs at a glance

Plan a 10pcs test set before a full build

A 10pcs pack is enough to sample the switch in the positions where feel and sound matter most. Use this sequence to decide whether the Berry Cheesecake suits your office keyboard.

  1. Pick one spring weight and keep the pack together: Order the 35g–42g or 45g–53g version, not both, so your first impression is not split between two different feels.
  2. Install the switches in a row you type on most: Place them in the home row or the letter keys you use constantly. Silent switches are judged by repeated typing, not by pressing a single loose switch.
  3. Type for a few days before judging sound: The silicone silencer and factory lube are designed to work together; give them normal use rather than evaluating them after a few keystrokes.
  4. Check for consistency across the pack: Because the bottom housing and stem pole area are dry by design, listen for any switch that sounds noticeably different from the others. A single outlier is easier to spot in a small set.
  5. Decide on the full set only after the test row feels right: If the weight or feel is not what you expected, you have lost only a 10pcs pack rather than a full board’s worth of switches.

Set realistic expectations for office noise

A silent linear switch reduces the sound of the switch itself, but the catalog does not provide a measured decibel rating or a comparison to other silent switches. That means you should not treat “silent” as a guarantee of a specific noise level in your office. The silicone silencer and the dry stem pole area are designed to soften the bottom-out, but the final sound also depends on your keyboard case, plate, keycaps, and typing force.

If your office has a strict noise policy, test the 10pcs set in your actual keyboard and room before buying enough switches for the whole board. The Berry Cheesecake is a reasonable candidate for a quieter linear build, but the supplied information does not confirm a specific sound level or a noise reduction figure.

Compatibility and build notes