What the Ø14 opal shade fits
The Liila / Miira Glass Ø14 opal is a spare glass shade designed for specific Nuura lamps. According to the catalog, it is recommended for the following Nuura models: Liila 1 Medium, Liila 7, Liila 12, Liila 1 Outdoor, Liila Wall Outdoor, as well as Miira 1, Miira 3, Miira 4, Miira 6, Miira 13, Miira Table, and Miira Wall.
Before you order, confirm that your lamp is one of these models. The shade is not a universal fit for all Liila or Miira variants, so checking the model number on your fixture is essential.
Catalog compatibility evidence
-
Liila / Miira Glass Ø14, opal: Anbefales til følgende lamper fra Nuura: Liila 1 Medium, Liila 7, Liila 12, Liila 1 Outdoor og Liila Wall Outdoor samt Miira 1, Miira 3, Miira 4, Miira 6, Miira 13, Miira Table og Miira Wall. This list is the only verified guide for which lamps accept this shade. If your lamp is not listed, the shade may not fit correctly.
Liila / Miira Glass Ø14, opal
Replacement steps (based on catalog facts)
The supplied evidence does not include step-by-step installation instructions. The following steps are based on general safe practices for glass shade replacement and the known compatibility list.
- Confirm your lamp model: Check the label or documentation on your Nuura lamp. It must match one of the models listed above.
- Turn off power and let the lamp cool: Safety first: switch off the circuit and wait for the bulb and any existing glass to cool completely.
- Remove the old shade: Carefully unscrew or unclip the existing glass shade. Keep any mounting hardware if it is reusable.
- Inspect the Ø14 opal shade: Check the new glass for cracks or chips. The shade measures Ø14 and is opal in finish.
- Attach the new shade: Secure the opal glass onto the lamp using the original hardware. Tighten gently to avoid breakage.
- Restore power and test: Turn the circuit back on and verify the shade is seated properly and the light operates normally.
What the catalog does not confirm
The supplied information does not include specific torque values, bulb wattage limits, or cleaning instructions for the Ø14 opal shade. For these details, refer to the original lamp manual or contact Nuura support. The shade is sold as a spare part; it does not include mounting brackets or bulbs.
