Start With the Base, Not the Seat

The LiteMax DLX Infant Car Seat Base is designed so the infant seat can stay in the car when you need to use multiple vehicles or hand off drop-off and pick-up between caregivers. That convenience only works if the base itself is installed correctly first.

This base includes a SafeZone Load Leg, a telescoping support leg with easy-to-read indicators that helps stabilize the seat base and, according to Evenflo, reduces crash forces up to 50%. Treat the load leg as part of the installation, not an optional add-on.

Installing the LiteMax DLX Base With the Load Leg

The supplied product information confirms the base can be installed with SureSafe LATCH lower anchors or with a vehicle belt using the belt-lock off. It does not include a step-by-step torque, routing or leg-length procedure, so follow the printed instructions that come with the base for the exact sequence.

  1. Choose your installation method: Decide whether you will use SureSafe LATCH with the supplied guides or the vehicle belt with the belt-lock off. Both are described by Evenflo as ways to achieve a secure installation.
  2. Position the base on the vehicle seat: Place the base where you intend to use it, then connect the lower anchors using the SureSafe LATCH guides or route the vehicle belt through the belt path and engage the belt-lock off.
  3. Deploy the SafeZone Load Leg: Extend the telescoping support leg until it reaches the vehicle floor. The leg has easy-to-read indicators; use them to confirm the leg is positioned as the base instructions require.
  4. Check the base for movement: With the base installed, test it at the belt path. The supplied information does not specify an acceptable amount of movement, so use the limit stated in your base instructions rather than guessing.
  5. Confirm the infant seat clicks in: Once the base is secure, set the infant seat into the base and confirm it locks into place before each ride. The base is intended to let the seat stay with baby during car-to-car transfers.

LATCH vs. Vehicle Belt: Which Fit Check Applies

Both installation routes use the same base, but the parts you check differ. The table below reflects only what the supplied product information confirms.

  • SureSafe LATCH with guides: Use the lower anchors and guides to install the base. Check that the connectors are engaged and that the base is stable at the belt path.
  • Vehicle belt with belt-lock off: Route the vehicle belt and use the belt-lock off to secure the base. Check that the belt is routed correctly and that the lock-off is engaged.
  • Load leg in both methods: The SafeZone Load Leg is part of the base regardless of which installation method you choose. Confirm the telescoping leg reaches the floor and the indicators read as described in your instructions.

What the LiteMax DLX Base Adds to Your Setup

  • LiteMax DLX Infant Car Seat Base with LoadLeg: SafeZone Load Leg is a telescoping support leg with easy-to-read indicators that helps stabilize the seat base and reduces crash forces up to 50%. This is the feature that separates the DLX base from a standard base, and it is the part you must deploy and check during installation.

    LiteMax DLX Infant Car Seat Base with LoadLeg

    LiteMax DLX Infant Car Seat Base with LoadLeg

  • LiteMax DLX Infant Car Seat Base with LoadLeg: SureSafe LATCH with guides gives you the option to use the lower anchors or the belt-lock off to achieve the same installation with a vehicle belt. You are not locked into one installation method, which matters if your vehicle's lower anchors are unavailable or you prefer a belt install.

  • LiteMax DLX Infant Car Seat Base with LoadLeg: Multiple car seat bases let baby stay in the infant seat when you need to use multiple cars, and different caregivers can be ready to go with a stay-in-car base. If you regularly switch vehicles, a second base may be more practical than reinstalling one base each time.

Fit Checks Before You Drive

These checks follow from the supplied features. They are not a substitute for the installation instructions or a professional inspection.

  • Load leg contact: Confirm the telescoping leg is extended to the vehicle floor and that the indicators show the position described in your base instructions.
  • Belt or anchor engagement: For a LATCH install, check that the SureSafe connectors are engaged. For a belt install, check that the belt is routed through the lock-off and the lock-off is closed.
  • Base stability: Test the base at the belt path. The supplied information does not give a movement tolerance, so use the limit in your instructions.
  • Seat-to-base lock: With the infant seat installed, lift it gently to confirm it is locked into the base before each trip.

When a Second Base Makes Sense

The LiteMax DLX base is sold in Black and is priced at USD 78.19 in the catalog, with a comparison price of USD 114.99. If two caregivers regularly use different cars, a second base can save you from moving and reinstalling one base repeatedly. That is a convenience decision, not a safety requirement; the base you use still needs to be installed and checked correctly in each vehicle.