Why a Locking Power Cable Matters for Your GTO Mount

A loose power connection during an imaging session can ruin hours of work. The Locking Power Cable for GTOCP1, GTOCP2, and GTOCP3 (CABLPF) is designed to stay firmly attached to compatible mounts, reducing the risk of accidental disconnection. This guide helps you decide if this cable fits your setup and what to watch for before buying.

Locking Power Cable (CABLPF) Key Details

  • Locking Power Cable for GTOCP1, GTOCP2, and GTOCP3 (CABLPF): Our 8' locking power cable is available as a spare part. Unfortunately, we cannot offer a longer power cable due to power loss over longer distances. The cable length is fixed. If your mount is far from a power source, you may need an extension or a different solution.

    Locking Power Cable for GTOCP1, GTOCP2, and GTOCP3 (CABLPF)

    Locking Power Cable for GTOCP1, GTOCP2, and GTOCP3 (CABLPF)

  • Locking Power Cable for GTOCP1, GTOCP2, and GTOCP3 (CABLPF): Mounts that can use this cable: All mounts that have the receptacle for the locking power connector shown above. Not all mounts accept this cable. You must check your mount's power receptacle for the locking connector shape.

  • Locking Power Cable for GTOCP1, GTOCP2, and GTOCP3 (CABLPF): This includes all mounts with these control systems: DA, QMD, SMD and GTOCP1, GTOCP2 and GTOCP3 (except the first black 1200 mounts). If you own an early black 1200 mount, this cable likely won't fit. Contact the store for an alternative.

Compatibility: Which Mounts Accept This Cable?

The locking power cable works with any mount that has the correct locking power receptacle. Based on supplied information, compatible control systems include DA, QMD, SMD, GTOCP1, GTOCP2, and GTOCP3. The only known exception is the first generation of black 1200 mounts, which use a non-locking connector.

If you have an early mount with a non-locking connector (including those first black 1200 mounts), the store can provide suitable cables upon request. Always verify your mount's power port before ordering.

Length Limitation and Power Loss

The manufacturer states that a longer cable is not offered due to power loss over longer distances. If your setup requires more reach, consider positioning your power supply closer or using a compatible extension that maintains adequate voltage. Do not assume any extension is safe without checking your mount's power requirements.

Other Uses: Cooling Fans

This cable can also power the cooling fans on the 10" Maksutov-Cassegrain and the 305 mm Riccardi-Honders Astrograph. If you own one of these optical tubes, the locking power cable may serve dual duty in your setup.

What to Do If Your Mount Uses a Non-Locking Connector

If your mount has an early non-locking connector (including the first black 1200 mounts), the locking cable will not fit. The store can provide alternative cables for these mounts. Contact Cloud Break Optics with your mount model to get the correct part.