Start with the stand and the ring

The Lume Cube Ring Light 18 Inch is a portable LED ring light that comes with a stand. Before you worry about camera settings or the perfect angle, get the hardware stable and connected. The ring light is designed to collapse and pack into a carry case, so setup begins by unfolding the stand and mounting the ring.

The supplied product information does not include step-by-step assembly instructions for the stand or the ring mount. If your unit includes printed instructions, follow those first. The tips below focus on the adjustments the product record confirms you can make: height, angle, color temperature and brightness.

What the Ring Light 18 Inch lets you adjust

  • Lume Cube Ring Light 18 Inch Portable LED Ring Light with Stand: With the Ring Light 18" you can customize height, angle, temperature, and brightness to illuminate and elevate your content. These four adjustments are the core of positioning. You can raise or lower the light, tilt it toward your subject, and change the color and intensity of the output without swapping gear.

    Lume Cube Ring Light 18 Inch Portable LED Ring Light with Stand

    Lume Cube Ring Light 18 Inch Portable LED Ring Light with Stand

  • Lume Cube Ring Light 18 Inch Portable LED Ring Light with Stand: Collapse the cordless ring light and pack it into the carry case to easily create professional content anywhere, anytime. Portability means you can set up in different rooms or locations. The carry case also protects the ring when it is not in use.

A practical setup sequence

Use this order to get from packed case to usable light. It assumes you have the stand and ring light that come with the product. If your kit includes additional pieces, check the printed guide for those first.

  1. Unfold and stabilize the stand: Open the stand legs fully on a flat, stable surface. The product record does not specify a maximum height or weight limit for the stand, so keep the ring light centered and avoid placing the stand on uneven ground where it could tip.
  2. Mount the ring light: Attach the ring light to the stand using the mount provided with your unit. The supplied information does not describe the mount type or tightening method, so follow any printed instructions and make sure the ring is secure before you let go.
  3. Set the height: The Ring Light 18 Inch allows you to customize height. For portraits, a common starting point is to bring the ring close to your subject’s eye level so the catchlight lands naturally in the eyes. For video calls, many people prefer the ring slightly above eye level to avoid shadows under the eyes. Adjust until the light feels flattering on your face, not harsh.
  4. Angle the ring toward your subject: The ring light can be angled. Tilt it so the center of the ring points toward your face or subject. A slight downward tilt often works well for seated portraits and desk-based video calls. Avoid pointing the ring directly at a window or mirror, which can create distracting reflections.
  5. Choose color temperature: The Ring Light 18 Inch lets you customize temperature. Warmer settings can feel cozy and natural for indoor portraits, while cooler settings can look crisp for tech or product content. Match the ring light to the ambient light in the room when possible, or use it as the main light and turn off other mixed-color sources.
  6. Adjust brightness: Brightness is adjustable. Start at a low level and increase until your subject is evenly lit without looking washed out. If you are using the ring light for video calls, check how you look on camera rather than judging only by eye, since cameras can respond differently.
  7. Power the light: The ring light is described as cordless and compatible with Sony NP batteries, which are not included. If you have Sony NP batteries, insert them according to the battery and product instructions. If you do not, the supplied information does not confirm whether the light can run on AC power, so check your unit’s documentation or the connector on the light before assuming a power source.

Positioning for portraits

For portraits, the ring light works best when it is the main light and is positioned close to the subject’s line of sight. That said, the right distance depends on the size of the subject and the look you want. The supplied product information does not give a recommended distance, so use your camera preview or a few test shots to find a distance that gives even illumination without flattening the face too much.

A ring light placed very close can produce a bright, even look with a distinct ring-shaped catchlight in the eyes. Moving it farther away softens the light and reduces the catchlight size, but may require higher brightness. Adjust height, angle and brightness together rather than changing only one variable at a time.

Positioning for video calls

For video calls, the goal is to look well lit and natural on a webcam. Place the ring light in front of you, slightly off to one side if you prefer a bit of shadow for depth, or directly in front for the most even look. The 18-inch size gives a broad, soft source that can be flattering for faces.

Keep the background in mind. A ring light placed too close to a wall can create a hard shadow behind you. Moving the light slightly forward or angling it can reduce that shadow. The product record does not specify a recommended distance for video calls, so test your framing and adjust until your face is evenly lit and the background is not distracting.

Portable use and packing

The ring light collapses and fits into a carry case, which makes it easy to move between rooms or take to a shoot. When packing, let the light cool if it has been on, collapse the ring as described in your unit’s instructions, and coil cables loosely to avoid strain. The supplied information does not detail the collapse mechanism, so if you are unsure, check the printed guide or the product page for your specific model.

Power and battery notes

  • Lume Cube Ring Light 18 Inch Portable LED Ring Light with Stand: This ring light is compatible with Sony NP Batteries for a cordless option (*Batteries are not included). If you want to use the ring light without a wall outlet, you will need compatible Sony NP batteries, which are sold separately. The supplied information does not state battery life or charging time, so plan to test your setup before an important call or shoot.

What to check before you rely on it

Before an important portrait session or video call, do a quick dry run. Turn on the ring light, set your preferred height, angle, temperature and brightness, and check how you look on camera. Confirm that your power source is working—either fresh Sony NP batteries or whatever power method your unit supports. Make sure the stand is stable and the ring is securely mounted.

The supplied product information does not include setup instructions for the stand or mount, nor does it specify maximum height, weight limits, or exact battery runtime. If those details matter for your use, consult the documentation that came with your unit or the product listing. The Ring Light 18 Inch gives you the adjustments you need to shape the light; the rest is a matter of testing and refining your position.