What Makes the Luxe Wall Vintage II with Float Mount Special
The Luxe Wall Vintage II with Float Mount is a custom made-to-order frame from Frameology’s Black Label collection. It uses a 1.2" wide x 1" deep wood molding in a Renaissance-style gold finish. The float mount creates a modern gallery look by lifting your print 1/8" off the backing, giving it depth without a traditional mat. This guide focuses on the practical steps to set up your frame and display your photo correctly.
What Comes with Your Frame
-
Luxe Wall Vintage II (With Float Mount): Each frame comes with a finished paper back, kraft paper dust cover, museum grade acrylic, and foam core float with 1/8" lift. Knowing what’s included helps you confirm you have all the pieces before starting assembly.
Luxe Wall Vintage II (With Float Mount)
-
Luxe Wall Vintage II (With Float Mount): We print your photo on Entrada Archival, a 100% cotton fine-art paper with an expanded color gamut for stunning prints. The fine-art paper is delicate and requires careful handling to avoid fingerprints or creases during setup.
-
Luxe Wall Vintage II (With Float Mount): Each frame includes a white cotton conservation mat. The mat provides a protective barrier between the print and the acrylic, and its clean white color complements the gold frame.
Step-by-Step Setup for Your Float Mount Frame
The supplied information does not include specific step-by-step instructions from Frameology. The following general guidance is based on the frame’s construction and typical float mount framing practices. For exact instructions, refer to the documentation that came with your frame.
- Unbox and inspect: Remove the frame from its packaging on a clean, flat surface. Check that the museum grade acrylic is not scratched and that the foam core float is intact. Handle the frame by the edges to avoid smudging the acrylic.
- Prepare your print: Your photo is printed on Entrada Archival fine-art paper. Handle it with clean, dry hands or wear cotton gloves to avoid transferring oils. The print should fit the designated print size for your frame variant (e.g., 8x10 frame uses a 5x7 print).
- Insert the print into the float mount: The foam core float has a 1/8" lift that creates the floating effect. Gently place your print onto the float backing, centering it. The float mount holds the print in place without a mat, so ensure the print lies flat and straight.
- Secure the back: Place the finished paper back over the assembly and secure it using the frame’s hardware (typically turn buttons or clips). The kraft paper dust cover is already attached to the back, so no additional dust cover is needed.
- Hang and display: Use a sturdy picture hanger rated for the frame’s weight. The Luxe Wall Vintage II is a wooden frame, so avoid hanging in direct sunlight or high-humidity areas to protect the fine-art paper and gold finish.
Choosing the Right Size for Your Space
The Luxe Wall Vintage II with Float Mount is available in frame sizes from 8x8 up to 30x40, with corresponding print sizes. For example, the 11x14 frame holds an 8x10 print, while the 20x20 frame holds a 16x16 print. Measure your wall space before ordering to ensure the frame fits comfortably. The float mount adds a contemporary feel, so it works well as a statement piece on an accent wall or above a console table.
Caring for Your Frame and Print
The museum grade acrylic protects your print from UV rays and dust, but it can scratch if cleaned with rough materials. Use a soft, lint-free microfiber cloth to gently wipe the acrylic. Avoid spraying cleaner directly on the acrylic; instead, lightly dampen the cloth. The Entrada Archival paper is 100% cotton and should not be exposed to moisture. Keep the frame away from heaters, air conditioners, and humid areas to preserve the print’s color gamut and the frame’s gold finish.
