What Are M4-0.7 Flat Head Slotted Machine Screws?
M4-0.7 machine screws are metric fasteners. The flat head profile sits flush with the surface when countersunk, making them ideal for applications where a low profile matters. The slotted drive accepts a standard flat-blade screwdriver, offering a classic fastening method that is still widely used in electronics enclosures, panel assembly, and light hardware projects. For specific dimensions and thread pitch, follow the supplied product instructions.
These screws are machine-threaded, meaning they are designed to be used with a pre-tapped hole or a matching nut. They are not self-tapping and should not be driven into unthreaded materials.
Product Specifications at a Glance
-
M4-0.7 X 22mm Machine Screws | Flat Head Slotted Drive | 18/8 Stainless Steel (600 / Pkg.): M4-0.7 x 22mm, flat head, slotted drive, 18/8 (304) stainless steel. The 22 mm length suits medium-thickness assemblies; the 18/8 stainless steel provides strong corrosion resistance for indoor, outdoor, and washdown environments.
M4-0.7 X 22mm Machine Screws | Flat Head Slotted Drive | 18/8 Stainless Steel (600 / Pkg.)
-
M4-0.7 X 22mm Machine Screws | Flat Head Slotted Drive | 18/8 Stainless Steel (600 / Pkg.): Non-magnetic 18/8 stainless steel construction. Non-magnetic behavior is useful in electronics or medical-adjacent environments where magnetic interference must be minimized.
How to Install M4-0.7 Flat Head Slotted Screws
Follow these general steps for a secure, flush installation. Always consult the manufacturer's instructions for your specific application.
- 1. Prepare the mating hole: Drill and tap a hole to M4-0.7 specifications, or use a pre-tapped hole. The flat head requires a countersink to sit flush. Use a countersink bit matched to the screw's head angle.
- 2. Align the screw: Insert the screw into the hole. For a nut, hold the nut in place with a wrench or finger pressure while turning the screw.
- 3. Drive with a slotted screwdriver: Use a properly sized flat-blade screwdriver. Apply steady axial pressure to keep the driver engaged in the slot. Turn clockwise to tighten. Avoid over-torquing—stop when the head is flush with the surface.
- 4. Check flushness: The flat head should sit level with or slightly below the surrounding surface. If it protrudes, the countersink may be too shallow.
When to Choose 18/8 Stainless Steel
18/8 (304) stainless steel offers strong corrosion resistance for indoor, outdoor, and washdown environments. This makes the M4-0.7 flat head slotted screw a reliable choice for kitchen equipment, marine accessories, outdoor enclosures, and areas exposed to moisture or cleaning agents. The trade-off is that stainless steel is softer than hardened alloy steel, so it is not recommended for high-stress structural joints or applications requiring high tensile strength.
Common Applications
Electronics enclosures where a flush finish is needed to avoid snagging cables or interfering with adjacent components. Panel mounting in control boxes or junction boxes where the slotted drive allows quick adjustments with a common tool. Light hardware assembly such as brackets, hinges, or nameplates where the corrosion resistance of 18/8 stainless steel adds longevity.
