What the MagnaFlow Street Series Cat-Back 15628 Offers

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15628 is designed for the 2006-2010 Dodge Charger 5.7L and the 2005-2008 Dodge Magnum 5.7L. This cat-back system replaces the stock exhaust components from near the catalytic converter back, delivering a resonant, powerful engine tone and dyno-proven performance. The system features mandrel-bent main piping and three straight-through mufflers, ending in a dual split rear exit with polished welded-on double-wall angle cut rolled edge tips. Follow the supplied product instructions for installation.

Sound Profile: What to Expect

The MagnaFlow 15628 produces a moderate exterior sound level and a mild interior sound level. This means the exhaust note is noticeable and sporty from outside the vehicle, especially at startup and under throttle, while the cabin remains relatively comfortable for daily driving. The three straight-through mufflers help achieve this balance, providing a deep tone without excessive drone.

Key Product Specifications

Installation Overview: What to Expect

The following steps are based on the supplied information for the MagnaFlow 15628. Always refer to the included instructions for your specific vehicle before starting.

  1. Prepare the Vehicle: Safely lift and support the vehicle. Allow the exhaust to cool completely if the vehicle has been driven.
  2. Remove the Stock Exhaust: Unbolt the factory exhaust system from the catalytic converter back. You may need to remove hangers and hardware. A penetrating lubricant can help loosen rusted bolts.
  3. Position the New System: Dry-fit the MagnaFlow 15628 components, starting from the catalytic converter connection and working toward the rear. The direct-fit design should align with existing hanger locations.
  4. Secure All Connections: Tighten all clamps and bolts to the manufacturer's specifications. Double-check that the exhaust is not contacting the underbody or suspension components.
  5. Check Fitment and Clearance: Lower the vehicle and inspect the exhaust's position. Start the engine and listen for any leaks or rattles. The system should have adequate clearance around the driveshaft, frame, and rear axle.

Vehicle Fitment and Compatibility

The MagnaFlow 15628 is specifically engineered for the 2006-2010 Dodge Charger 5.7L and the 2005-2008 Dodge Magnum 5.7L. It is a cat-back system, meaning it connects after the catalytic converter. If your vehicle has a different engine displacement or is outside these model years, this system will not fit. Always verify your vehicle's engine size and year before purchasing.

What the Supplied Information Does Not Cover

The supplied information confirms the direct-fit design and the general installation ease, but it does not provide specific torque values, step-by-step photos, or instructions for dealing with rusted hardware. For a complete installation guide, refer to the product manual included with the system. Additionally, sound level measurements are described as moderate exterior and mild interior, but no decibel ratings are provided.