Quick Answer

Assemble your Matilda Sponsons Kit by cleaning resin parts carefully, dry-fitting before gluing, and using putty to hide seams. For conversions, reposition the sponsons or add them to non-standard vehicle hulls.

Why Resin Prep Matters

The Matilda Sponsons Kit uses crisp, high-quality resin casting, but resin parts often have mold lines or slight warping. Skipping proper cleaning can cause poor fits or visible seams that ruin the final look. Take time to wash parts in warm soapy water and trim flash with a sharp hobby knife.

Conversion Possibilities

The kit is designed to add detailed sponsons to your miniature builds, enhancing their battlefield presence with a classic, robust look. While intended for a Matilda tank, you can adapt the sponsons for other 28mm vehicles or terrain pieces. Consider mounting them on a different hull for a unique conversion, or use them as standalone bunker emplacements.

Step-by-Step Assembly & Conversion Guide

  1. Clean and Prepare Resin Parts: Wash all resin pieces in warm soapy water with a soft toothbrush to remove mold release. Let dry completely. Trim mold lines and flash with a hobby knife or fine file. Skipping this step can cause paint adhesion failure and poor fit.
  2. Dry-Fit Before Gluing: Test-fit the sponsons onto your tank hull or chosen surface without glue. Check alignment and contact points. Sand any high spots or warped edges gently. Forcing a poor fit leads to gaps; use a small file to adjust slowly.
  3. Glue and Fill Seams: Apply super glue (cyanoacrylate) to both mating surfaces. Press and hold for 30 seconds. Fill any remaining gaps with modeling putty or green stuff, then smooth with a wet tool. Too much glue can squeeze out and ruin detail; use a pin or toothpick to apply small drops.
  4. Add Conversion Details: For a unique look, reposition the sponsons at a different angle or attach them to a non-standard hull. Use plasticard or brass rod to create custom mounting brackets. Let all modifications cure fully before painting. Check that the conversion doesn't interfere with the vehicle's weapon arcs or crew access.

Product Facts

  • Matilda Sponsons Kit: Crisp, high-quality resin casting for fine detail. You'll get sharp panel lines and rivets, but need to handle resin carefully to avoid breakage during assembly.

    Matilda Sponsons Kit

    Matilda Sponsons Kit