Quick answer

Charge the Melt 2 fully, enable Bluetooth on your phone, then pair it in the We-Vibe app before your first session. Place the opening over the external clitoris with light pressure and start on the lowest air-pulse level.

Why pairing before play saves frustration

The Melt 2 is controlled through the We-Vibe app, so the pairing step is not optional if you want app control. Doing it once at home, away from the moment itself, lets you confirm the connection and learn the controls without interruption. Bluetooth range is limited by walls and bodies, so keep your phone within a few meters of the toy during use.

If you plan to hand control to a partner, pair on your own phone first, then invite them through the app rather than trying to pair two phones at once. This avoids the common mistake of both devices competing for the same connection.

Placement matters more than intensity

Air pressure stimulators work by creating pulses of air around the external clitoris, not by vibration against it. The Melt 2's slim, curved shape and flattened tip are designed to sit comfortably between two bodies, including during penetrative sex. Start with the opening centered and a light seal; pressing hard or moving it around too much breaks the seal and makes the pulses feel weaker.

Because the shape is slim and simple, a water-based lubricant helps maintain comfort and a consistent seal. Avoid silicone-based lubricant if you are unsure about the toy's material compatibility, and check the supplied instructions.

When app control is not the right choice

App control adds remote and pattern options, but it also adds a dependency: phone battery, Bluetooth stability, and app permissions. If you want a session with no screen involved, the Melt 2 can be used without the app once you know its onboard controls. For partner play across a distance, test the connection in the same room before relying on it remotely, since range and interference vary by home.

Melt 2 setup steps

  1. Charge fully before first use: Connect the supplied charging cable and let the Melt 2 charge completely. A partial charge can cause it to disconnect mid-session, which looks like a pairing fault. Use the original cable and a known-working adapter; a weak charger can slow charging.
  2. Enable Bluetooth and location permissions: Turn on Bluetooth on your phone and allow the We-Vibe app the permissions it requests. On some phones, pairing fails silently if location permission is denied. If the app cannot find the toy, check permissions before reinstalling.
  3. Pair in the app, not in phone settings: Open the We-Vibe app, choose to add a device, and select the Melt 2 from the list. Pairing through your phone's Bluetooth settings first can prevent the app from connecting. If pairing stalls, forget the toy in phone Bluetooth settings and start again in the app.
  4. Run a low-level test: Before placing the toy, switch to the lowest air-pulse level and confirm the app responds. This checks the connection and lets you feel the pulse style without overstimulation. Keep the phone within a few meters during the test to rule out range issues.
  5. Place with a light seal: Apply a small amount of water-based lubricant, center the opening over the external clitoris, and let the toy rest lightly. Pressing hard or sliding it around breaks the air seal and reduces sensation. If pulses feel weak, reseat the opening rather than raising the intensity.
  6. Adjust intensity gradually and hand over control if desired: Increase one level at a time and pause between changes. To let a partner control it, use the app's partner invitation feature rather than pairing a second phone directly. Agree on a stop signal before handing over control, especially remotely.

Product facts