Quick answer
You can attach the Baghera metal bell to your Speedster Fireman in about five minutes using the pre-drilled hole on the steering column. No special tools are needed, but a small Phillips screwdriver makes it easier.
Why a metal bell matters
A metal bell adds an authentic vintage touch to the Speedster Fireman and gives your child a simple way to signal their presence. Unlike plastic bells that can crack or fade, the Baghera metal bell is a spare part designed specifically for this model, so the mounting hole and clamp match perfectly.
How to install the metal bell
- Position the bell on the steering column: Slide the bell's metal clamp over the steering column tube, just below the handlebar. The pre-drilled hole on the column faces forward; align the bell's mounting hole with it. Common mistake: placing the clamp too high or low, which can cause the bell to rub against the handlebar or the car body.
- Insert and tighten the screw: Take the screw that came with the bell (or a small Phillips head screw) and thread it through the bell's bracket into the column hole. Tighten it by hand until snug, then give it a quarter turn with a screwdriver. Over-tightening can strip the threads in the metal column or crack the bell bracket. Stop as soon as the bell feels secure.
- Test the bell action: Press the thumb lever on top of the bell a few times. The clapper should strike the bell dome cleanly. If the sound is muffled, loosen the screw slightly and adjust the bell's angle so the clapper hangs free. If the bell doesn't ring, the clamp may be too tight or the bell is twisted. A slight adjustment usually fixes it.
Product facts
-
Metal bell for Speedster Fireman: The Metal bell for Speedster Fireman is a Baghera spare part with reference code 1740, designed as a replacement for the Speedster Fireman ride-on. This ensures the bell's bracket and screw alignment are correct, so you won't have to drill extra holes or modify the steering column.
Metal bell for Speedster Fireman