Quick answer
Use the 2 prong metal wire tool to shape the magnetic particles in cat eye gel into a heart design. It works like a stencil magnet for precise DIY nail art.
Why use a metal wire instead of a regular magnet?
A standard flat magnet creates wide, diffuse lines. The 2 prong metal wire focuses the magnetic field into two distinct points, which produces a clean heart outline in the cat eye gel. This gives you more control over the final shape without needing to freehand the design.
Trade-offs to know before starting
The heart shape is fixed by the wire prongs – you cannot adjust the width or angle mid-application. Practice on a nail tip first to get the placement right, because the gel starts to set quickly under a lamp.
Step-by-step: Heart shape with metal wire
- 1. Apply cat eye gel base coat: Paint a thin, even layer of magnetic cat eye gel on your nail. Do not cure yet. The gel must remain wet for the magnet to move the particles. Keep the gel layer thin – thick gel resists particle movement.
- 2. Hold the metal wire close to the nail: Position the 2 prong metal wire tool about 1-2 mm above the wet gel surface. The prongs should point toward the nail. Hold it steady for 10-15 seconds. If you hold the tool too far away, the heart will be faint. Too close may drag the gel.
- 3. Check the heart shape and cure: Remove the tool and inspect the pattern. If it looks correct, cure the gel under a UV/LED lamp according to your gel's instructions. If not, wipe and reapply. You cannot reposition the particles once the gel starts to cure – work quickly.
What you need
-
2 Prong Metal wire For Heart Shape for Magnetic Cat Eye: 2 Prong Metal Wire For Heart Shape for Magnetic Cat Eye is a nail care accessory designed for use with magnetic cat eye nail products, helping create heart shaped effects. This tool gives you a repeatable heart pattern without relying on a freehand magnet sweep, making it easier to get consistent results on every nail.
2 Prong Metal wire For Heart Shape for Magnetic Cat Eye
