Quick Answer
Apply EVO water decals to your MGSD Destiny Gundam by prepping the surface, cutting out markings, soaking briefly, and sliding them into place with a cotton swab. Work in small sections and seal with a clear coat for a durable finish.
Why Surface Prep Matters
Before you start, make sure the plastic is clean and free of dust or oils. A quick wash with mild soap and water, or a wipe with a lint-free cloth, helps the decal adhere evenly. Skipping this step can cause silvering or bubbles under the decal.
If your kit has a gloss coat, application will be smoother, but EVO decals work fine on bare plastic. Just avoid touching the surface with bare fingers after cleaning.
Choosing the Right Tools
You don't need expensive equipment. A small bowl of lukewarm water, a hobby knife, tweezers, cotton swabs, and a soft cloth are enough. Some builders prefer a decal setting solution for tricky curved areas, but it's optional.
The EVO Studio sheet for the MGSD Destiny Gundam includes a variety of markings, so you can pick and choose which ones to apply. Plan your layout before cutting to avoid wasting decals.
Step-by-Step Application Guide
- Prepare the Surface: Clean the model parts with mild soapy water or a lint-free cloth to remove dust and oils. Let them dry completely before applying decals. A clean surface prevents bubbles and silvering.
- Cut Out the Decal: Use a sharp hobby knife or scissors to cut close to the printed design. Leave a small margin of clear film to make handling easier. Cutting close reduces excess film that can show after application.
- Soak in Water: Dip the decal in lukewarm water for about 10-15 seconds until the backing paper slides freely. Don't soak too long or the decal may detach and fold. If the decal doesn't slide easily, wait a few more seconds, but avoid over-soaking.
- Position and Slide: Slide the decal onto the model using a damp cotton swab or your fingertip. Position it carefully, then gently press out air bubbles and excess water from the center outward. Work slowly; once the decal touches the surface, repositioning is tricky.
- Let Dry and Seal: Allow the decal to dry completely, preferably overnight. Apply a clear coat (gloss or matte) to protect the decal and blend it with the surrounding paint. Sealing prevents peeling and gives a uniform finish.
Product Facts
-
MGSD Destiny Gundam EVO Water Decal: This EVO Studio water decal sheet is specifically designed for the MGSD Destiny Gundam and includes various markings and insignias. You get a tailored set of markings that match the kit's panel lines and surfaces, so you don't have to trim or improvise as much as with generic sheets.
MGSD Destiny Gundam EVO Water Decal
