Quick answer

Assembling the Mokee Mini Cot Bed without drawer and pairing it with the Luxury Breathable Air Mattress takes about 30 minutes. Follow the steps below to avoid misalignment and ensure a snug mattress fit.

Why choose the no-drawer version?

The Mini Cot Bed without drawer is lighter and simpler to assemble than the drawer model. It also gives you more storage space underneath for bins or baskets. The trade-off is that you lose the built-in drawer for baby essentials, so plan where you'll keep sheets and blankets.

What you'll need

You only need a Phillips-head screwdriver (not included). All screws, bolts, and Allen keys come in the box. Lay out the parts on a soft surface to avoid scratching the wood.

Assembly steps

  1. Attach the side panels: Insert the cam bolts into the pre-drilled holes on the headboard and footboard. Slide the side panels onto the bolts and tighten with the Allen key. Common mistake: over-tightening can strip the threads; stop when snug. Check that all cam bolts are fully seated before moving on.
  2. Install the mattress support base: Place the slatted base into the lower support brackets on both side panels. Ensure it clicks into position evenly. Common mistake: forcing the base if the brackets are misaligned; loosen the side panel bolts slightly, adjust, then retighten. The base should sit flat with no wobble.
  3. Add the Luxury Breathable Air Mattress: Unroll the mattress and let it expand for 10 minutes. Place it on the slatted base, centered with no gaps. Common mistake: using the mattress before full expansion can cause uneven support; wait until it reaches full thickness. The mattress should fit snugly against all four sides.

Product facts