What This Cable Does

A Mini DIN 8 Pin AV Splitter Cable lets you connect one Mini DIN 8 Pin video source to two separate displays or recording devices. It is a practical solution for sharing a single AV signal without extra power or converters.

The Innov8 Wholesale Ltd cable uses a Mini DIN 8 Pin male connector on one end and splits into two Mini DIN 8 Pin female ports. This design works with any device that uses the same 8-pin Mini DIN interface — common on older CCTV cameras, projectors, AV receivers, and some multimedia equipment.

Cable Details at a Glance

  • Mini DIN 8 Pin Male to Dual Female AV Splitter Cable 0.5m: Mini DIN 8 Pin Male to Dual Female AV Splitter Cable, 0.5m length, supports audio and video signal transmission, plug and play with no software required. The short 0.5m length keeps the splitter close to the source device, reducing cable clutter. The plug-and-play nature means you do not need drivers or configuration.

    Mini DIN 8 Pin Male to Dual Female AV Splitter Cable 0.5m

    Mini DIN 8 Pin Male to Dual Female AV Splitter Cable 0.5m

Connecting a Source to Two Displays

This process assumes your source device and both displays have Mini DIN 8 Pin female ports. If any device uses a different connector, you will need an adapter (not supplied).

  1. 1. Identify the source and displays: Confirm that the video source (e.g., a DVR or CCTV camera) and both target displays or recorders have Mini DIN 8 Pin female ports.
  2. 2. Connect the male end to the source: Plug the single Mini DIN 8 Pin male connector into the source device's output port. Ensure it is fully seated for a secure connection.
  3. 3. Attach each display to a female port: Connect a standard Mini DIN 8 Pin male-to-male cable (not supplied) from each female port on the splitter to the display's input. Both displays will receive the same signal.
  4. 4. Power on and check signal: Turn on the source and displays. The splitter requires no configuration; if a display shows no signal, verify all connections are tight and the cables are compatible.

Where This Setup Fits Best

This splitter is useful for CCTV monitoring where one camera feed needs to be seen on two monitors, or for presentation setups where a single projector output is shared with a nearby screen. It also works in AV installations where a source like a DVD player or media centre needs to feed two displays simultaneously.

Because the cable is only 0.5m long, it is best kept near the source device. For longer runs to the displays, use additional Mini DIN 8 Pin extension cables (not supplied).

What the Supplied Information Does Not Cover

The catalog does not specify the maximum supported resolution, refresh rate, or cable gauge. If your application requires high-bandwidth video or long cable runs, test the setup before permanent installation. The splitter only works with devices that share the same Mini DIN 8 Pin pinout — not all 8-pin Mini DIN connectors are wired identically.

For best results, confirm compatibility with your specific device models before purchase.