What the Mini Sharp Diamond Folding Sharpener Does

The DMT Mini Sharp is a portable diamond folding sharpener designed for field use. Its coarse 325 mesh surface (45 micron grit) is meant to restore a dull edge quickly. The manufacturer describes it as a first step: use the coarse side to get the edge back, then follow with a fine sharpener for a polished finish.

This sharpener is not a complete sharpening system on its own. It is intended for touch-ups and initial edge repair, not for final honing. If you need a finished edge, plan to use a fine stone after the Mini Sharp.

Mini Sharp Build and Portability

  • Mini Sharp, COURSE, Diamond Folding Sharpener: Grit Size: 45 micron, 325 mesh. Keychain attachment, lightweight and portable. The coarse diamond surface removes material quickly, making it suitable for field repairs. The keychain loop means you can keep it attached to a pack or knife sheath for immediate access.

    Mini Sharp, COURSE, Diamond Folding Sharpener

    Mini Sharp, COURSE, Diamond Folding Sharpener

Using the Mini Sharp in the Field

This process is based on the manufacturer's stated sequence: coarse first, then fine. The supplied information does not include specific angles, stroke counts, or pressure recommendations. Use common knife-sharpening sense and adjust based on the blade's condition.

  1. 1. Open and stabilize the sharpener: Unfold the diamond plate until it locks open. Place it on a flat, stable surface or hold it firmly in your non-dominant hand. The folding design makes it compact, but you need a steady base for consistent strokes.
  2. 2. Use the coarse side to re-establish the edge: With the blade edge leading, draw the knife across the diamond surface at your usual sharpening angle. Repeat on both sides until you feel a burr or the edge starts to catch. This step removes nicks and dullness.
  3. 3. Switch to a fine sharpener for finishing: The Mini Sharp is labeled "COURSE" (coarse). After the edge is restored, move to a fine diamond or ceramic stone to refine the edge. The manufacturer explicitly says to "use the FINE sharpener after" the coarse step.
  4. 4. Clean and store: Wipe the diamond surface with a dry cloth to remove metal filings. Fold the sharpener and secure it via the keychain attachment. Store it away from moisture to prevent rust on the steel parts.

What the Supplied Information Does Not Cover

The catalog record does not specify a recommended sharpening angle, number of strokes, or whether the diamond plate is lubricated or used dry. For best results, follow the same angle you use with other bench stones. If the blade is very dull, several passes on the coarse side may be needed before moving to the fine stone.

The Mini Sharp is not a replacement for a full sharpening kit. It is a field tool for quick edge recovery when you do not have access to a bench stone. For serious edge damage, start with a coarser diamond plate if available.