Why fitment comes first
Before you choose mud flaps for your Tesla Model Y, the most important step is checking your vehicle's model year. The RPM TESLA screwless mud flaps are designed specifically for 2020 to 2024 Model Y vehicles. They do not fit 2025+ Model Y models, so verifying your year avoids a frustrating return.
The design uses existing factory grommets and, on some newer 2020-2024 builds, a single bolt behind the rear wheel. This means no drilling or permanent modification to your car—a real advantage if you want protection without altering the body.
What makes them screwless
Unlike traditional mud flaps that require screws into the fender or rocker panels, these flaps use the factory's own holes. For the front, you remove the plastic grommets from the fender liner, position the flap, and press in longer grommets supplied in the kit. The rear installation is similar, but on some Model Ys you will need to remove a bolt under the fender liner and then reinstall it through the flap's plastic tab.
The advantage is a clean, OEM-like fit with no risk of rust from exposed screw holes. The trade-off: the rear bolt can be tight. If you feel increasing resistance while unscrewing, the instructions recommend lubricating the threads to avoid breaking the welded nut. This is not a common issue, but it is worth knowing before you start.
Fitment facts from the catalog
-
2020-2025 | Model Y Mud Flaps Screwless (Set of 4): Only fits 2020 - 2024 Model Y. Does not fit 2025+ Model Y. Model year is the single most important compatibility check. Ordering for a 2025+ Model Y will not work.
2020-2025 | Model Y Mud Flaps Screwless (Set of 4)
-
2020-2025 | Model Y Mud Flaps Screwless (Set of 4): They fit directly behind your wheel well in the draft of the wheel, creating no increased drag or reduced range. Aerodynamic efficiency is a key concern for EV owners. These flaps avoid the range penalty that some bulkier designs cause.
-
2020-2025 | Model Y Mud Flaps Screwless (Set of 4): These are almost 3/4" shorter than TESLA's OEM version, making them speed bump proof. Lower ground clearance is a common worry with mud flaps. The shorter profile reduces scraping risk without sacrificing coverage.
How they protect your Model Y
The primary job of these mud flaps is to block rocks, sand, and road debris thrown up by your tires. The kit includes four flaps—one for each wheel—which shield the doors and rear quarter panels. Tesla owners often report chips on the lower body panels, especially behind the front wheels, so adding protection there makes sense.
The material is rigid ABS plastic, which holds its shape better than the thin flexible OEM flaps that some owners say bend in the wind. The solid construction also means they stay put at highway speeds without flapping or vibrating.
Screwless vs OEM mud flaps
The RPM TESLA set is priced lower than Tesla's official front-only kit and includes all four corners. The OEM flaps are thinner and only cover the front wheels, leaving the rear unprotected. The screwless design also avoids any drilling, while Tesla's own flaps require adhesive or screws.
- Coverage: RPM TESLA: 4 flaps (all wheels). OEM: 2 flaps (front only).
- Installation: RPM TESLA: no drilling, uses factory grommets and one bolt per rear. OEM: adhesive tape or screws into fender.
- Profile height: RPM TESLA: ~3/4" shorter than OEM, reducing speed bump contact.
- Material: RPM TESLA: rigid ABS plastic. OEM: thin flexible plastic.
Installation realities you should know
While the process is straightforward for most owners, a few details matter. The front fender liner may not be assembled identically on every Model Y, so you might need to adjust the flap position for a gap-free fit. The instructions include a video for front flap adjustment if needed.
For the rear, the bolt removal step requires care. The instructions warn not to force the bolt, as the welded nut inside the fender can break off. If the bolt resists, use lubricating oil and watch the provided bolt removal help video. This is not a deal-breaker, but it is a real step that a simple press-in grommet installation does not have.
Product details that affect your decision
- 2020-2025 | Model Y Mud Flaps Screwless (Set of 4): Made from strong solid ABS rigid plastic. ABS is impact-resistant and holds its shape, offering durable protection without the flexibility of thinner plastics.
- 2020-2025 | Model Y Mud Flaps Screwless (Set of 4): On the rear mud flaps there is one bolt you may have to unscrew and then screw back in. This step is not required on all 2020-2024 Model Ys, but be prepared for it. Having a socket set and lubricant handy simplifies the job.
What the catalog does not confirm
The supplied information does not specify whether the flaps fit Model Y Performance trims differently, though the standard fitment covers all 2020-2024 variants. There is also no mention of paint protection film compatibility—if you already have PPF on the lower panels, the flaps will sit over it, but the catalog does not address any interaction.
If your Model Y has aftermarket wheel spacers or wider tires, the coverage may differ. The flaps are designed for stock wheel positions, so factor that in if you have modified your setup.
