Why the Monolith may slip or press

The Monolith is a slightly oversized frame with a flat-face design, bevelled edges and metal temple end-caps. Those design facts tell you it is a bold, high-fashion shape, but they do not tell you how it will sit on your particular face. Slipping and pressure points usually come down to fit, not a single fault in the frame.

Before you try any fix, check the basics: are the temples sitting evenly over your ears, is the bridge resting without pinching, and does the frame stay put when you look down? If the answer is no, the adjustment tips below can help you narrow down the cause. The supplied Monolith record does not include measurements, lens specifications or care instructions, so treat any fit change as a careful trial rather than a guaranteed repair.

What the Monolith record confirms

  • Monolith: Slightly oversized glasses with a flat-face design, bevelled edges and metal temple end-caps. These design features affect how the frame sits and where it may contact your face, so they are the starting point for diagnosing pressure or slip.

    Monolith

    Monolith

  • Monolith: Available in Gloss Black with Silver Metal Trim and Clear Blue Blocker Lens. The colour and lens option is the only variant evidence supplied; it does not change fit, but it confirms what you are working with.

A careful routine to stop sliding and relieve pressure

Work through these steps one at a time and stop if anything feels worse. The goal is to identify the cause, not to force the frame into a new shape.

  1. Check temple alignment first: Look at the frame from above and from the side. If one temple sits higher or flares out more than the other, that side may be causing both slip and pressure. Gently note the difference before adjusting anything.
  2. Test the bridge and nose area: A frame that slides down often has too little grip at the bridge. Check whether the frame rests evenly or pinches. If it pinches, the pressure point may be at the sides of the nose rather than the top.
  3. Adjust temples in small increments: If the frame slides forward, the temples may need a slight inward curve behind the ears. Make one small change, wear the frame for a few minutes, and reassess. Avoid bending metal end-caps sharply; the Monolith has metal temple end-caps, so slow, even pressure is safer than a quick twist.
  4. Recheck pressure points after each change: Pressure behind the ears or at the temples often appears after a frame is tightened. If you feel a new hot spot, undo the last change before trying another.
  5. Consider the lens and weight balance: The supplied record does not give a weight or lens thickness, so you cannot assume the frame is heavy or light from the description alone. If the frame feels front-heavy, a professional optician can check the balance and suggest a safe adjustment.

Common causes and what to try

  • Frame slides down when you look down: Usually a temple grip issue. Try a small inward adjustment behind the ears, or ask an optician to check the temple length and bend.
  • Pressure on the sides of your head: The frame may be too narrow for your face. The Monolith is described as slightly oversized, but that does not guarantee a wide fit. If the temples press inward, a professional can assess whether the frame can be widened safely.
  • Pressure on the bridge of your nose: Check whether the frame is sitting too low. If the bridge is pinching, the frame may need a slight upward adjustment or a different nose pad fit. The supplied record does not list nose pad details, so have an optician inspect them.
  • Frame feels heavy or unbalanced: The Monolith record does not include a weight figure. If the frame feels heavy, the cause may be lens thickness or frame balance rather than the frame alone. A professional can check the fit and lens choice.

When to stop adjusting and see an optician

If you have made two or three small adjustments and the frame still slips or presses, stop. Repeated bending can weaken the frame, and the Monolith's metal temple end-caps are not something to force. An optician can check alignment, temple bend and bridge fit with tools that are safer than home adjustments.

Also see a professional if you notice numbness, persistent headaches or skin irritation. These are not normal fit outcomes, and the supplied Monolith record does not include care or safety instructions that would justify ignoring them.

What this guide cannot tell you

The supplied Monolith record does not include measurements, weight, lens specifications, nose pad details or care instructions. That means there is no verified basis for saying the frame is heavy, narrow, wide or adjustable in a particular way. Use the steps above to diagnose your own fit, and rely on a qualified optician for any adjustment that involves bending the frame.