Quick answer
Clean your Moogee Green Marble with a soft, dry cloth and keep it out of direct sunlight to protect the marbled glow finish. Display it on a stable shelf away from heat and handle it by the base to avoid fingerprints and scratches.
Why the marbled glow finish needs extra care
The Moogee Green Marble is a sofubi figure with a glow-in-the-dark green marbled surface. Unlike painted figures, the color and glow come from the material itself, so abrasive cleaners or rough handling can dull the effect. The marbled pattern is unique to each piece, which means any scratch or scuff is permanent. Treat the surface as you would a soft vinyl record: dust gently and avoid anything that could leave a mark.
When to skip the display case
A sealed display case can trap dust and moisture, and the glow effect actually benefits from occasional exposure to light. If you use a case, choose one with ventilation and open it monthly to let the figure breathe. For most collectors, an open shelf with indirect light is safer and easier to maintain.
Step-by-step care and display routine
- Dust with a soft, dry cloth: Use a clean microfiber cloth or a soft makeup brush to remove dust from the figure and its headercard. Work from top to bottom with light pressure. Never use water or cleaning sprays on the vinyl. Check the cloth for grit before touching the figure—a single hard particle can scratch the marbled surface.
- Handle by the base, not the head: Pick up the Moogee by its legs or base to avoid stressing the neck joint or leaving fingerprints on the glow surface. If you must touch the head, wash and dry your hands first. Keep the figure away from oily hands and sunscreen—residue can cloud the glow effect.
- Display away from direct sun and heat: Place the figure on a stable shelf where it receives indirect light. Avoid windowsills, radiators, and areas near heating vents. UV light can fade the green marble over time, and heat can soften the sofubi vinyl. Rotate the figure every few weeks so any light exposure is even and the glow charges from different angles.
- Store the print and headercard flat: The included MooGee 5×7 print and headercard are part of the collectible. Keep them in a acid-free sleeve or between two rigid boards, away from moisture and direct light. Do not tape or glue the print to the wall—removal can tear the paper and reduce the set's completeness.
- Recharge the glow safely: To maintain the glow, expose the figure to indirect sunlight or a cool LED lamp for a short period, then return it to display. Avoid halogen or incandescent bulbs that emit heat. A few minutes of light every month is enough—overexposure to strong light can degrade the vinyl over years.
Product facts
-
Moogee / Green Marble: Approximately 6 inches tall, with a glow-in-the-dark green marbled sofubi body. The mid-size scale fits standard shelves, but the glow material means you should avoid prolonged direct sun to prevent fading.
Moogee / Green Marble