What this cutter set does
The Moon & Crescent Disc Cutter Set punches four crescent shapes from sheet metal. The set includes four sizes — 9 mm, 12 mm, 16 mm and 21 mm — machined from a solid steel block with hardened cutting edges. It is designed for bench jewellers and silversmiths who need repeatable celestial or decorative components without hand-sawing each shape.
The integrated dies in the block align the cut for you, so you can produce consistent crescents for earrings, pendants or decorative elements. The tool works on softer metals like silver and brass.
The set at a glance
-
Moon & Crescent Disc Cutter Set — 4 Sizes 9–21 mm Steel Punches for Metalwork Design: Four crescent sizes: 9 mm, 12 mm, 16 mm and 21 mm. Gives you a range of component sizes from one tool, useful for matching pairs or building a design series.
Moon & Crescent Disc Cutter Set — 4 Sizes 9–21 mm Steel Punches for Metalwork Design
-
Moon & Crescent Disc Cutter Set — 4 Sizes 9–21 mm Steel Punches for Metalwork Design: Machined from a solid steel block with hardened cutting edges. A rigid block keeps the dies aligned and supports a clean, repeatable shear on softer metals.
Cutting a crescent blank: a bench routine
The supplied instructions are brief: align the metal, strike firmly with a suitable hammer, and clean the dies after use. Work on a solid surface and take your time with the first cut to confirm alignment.
- Choose your size and metal: Select one of the four crescent sizes. The cutter is intended for softer metals such as silver and brass.
- Align the sheet in the cutter block: Place your sheet metal securely within the cutter block, following the supplied instruction to align it properly.
- Strike firmly with a suitable hammer: Use a firm, controlled strike with a suitable hammer to drive the punch through the sheet. The goal is a clean shear, not repeated light taps.
- Remove the blank and clean the die: Take out the crescent blank and clean the die after use to maintain cutting edge integrity.
Getting clean cuts in silver and brass
The cutter is designed for softer metals like silver and brass. The hardened edges shear the metal rather than tear it, but the quality of the cut still depends on a firm strike and a well-aligned sheet. If the metal shifts during striking, the crescent edge will not be clean.
For batch production, the integrated dies remove the need to saw each shape by hand. That saves time and keeps the shape consistent from one blank to the next. The set is aimed at intermediate to professional makers who need repeatable components.
Where this set fits at the bench
This is a specialist tool for celestial and nature-inspired designs. If your work includes moon phases, crescent pendants or decorative inlays, the four sizes cover small to medium components. It replaces tedious hand-sawing for these specific shapes, but it is not a general-purpose disc cutter for circles or other profiles.
Because the dies are integrated into one block, storage and setup are straightforward. The trade-off is that you are limited to the four supplied crescent sizes; the set does not offer custom dimensions.
Caring for the cutter
Clean the dies after each use to maintain cutting edge integrity. The supplied information does not specify a cleaning method, so use a approach that removes metal fragments without damaging the hardened edges. Store the block so the cutting edges are protected from knocks.
The tool is UK-stocked at the Birmingham workshop, with same-day dispatch on orders before 2pm and free UK delivery over £30. A 30-day return window lets you try it at the bench.
