What the MRANT12W Offers

The MRANT12W is a universal rubber antenna, often called a "rubber duck" type, designed for AM/FM radio reception in marine and vehicle environments. Its flexible mast and adjustable base make it a practical choice for boats where a rigid antenna might be impractical.

Before you start, gather the antenna and a suitable mounting location. The MRANT12W comes with a cable, so you have some flexibility in where you place it relative to your radio. Follow the product instructions for cable length details.

MRANT12W Catalog Facts

  • MRANT12W: Universal Rubber Antenna – “Rubber Duck” Type This design is flexible and forgiving, ideal for mounting on curved or uneven surfaces common on boats.

    MRANT12W

    MRANT12W

  • MRANT12W: Flexible Mast Reduces the risk of damage from low-hanging branches or tight storage covers.

  • MRANT12W: 78" Cable Gives you enough length to route the cable from the antenna to your radio without needing an extension.

  • MRANT12W: Adjustable Base for Top or Side Mounting Surfaces Allows you to install the antenna on a horizontal or vertical surface, adapting to your boat's layout.

Installing the MRANT12W Antenna

Follow these steps to mount and connect your MRANT12W antenna. The supplied catalog does not include specific torque values or wiring diagrams, so use standard marine practices and your radio's manual for the connection.

  1. Choose a mounting location: Select a spot with a clear view of the sky, away from large metal objects or other antennas. The adjustable base works on top or side surfaces, so you have options.
  2. Mount the antenna: Use the adjustable base to secure the antenna to your chosen surface. The base can be oriented for either top or side mounting. Tighten the mounting hardware securely by hand.
  3. Route the cable: Run the cable from the antenna to your AM/FM radio receiver. Keep the cable away from power wires and other sources of electrical noise to minimize interference.
  4. Connect to the radio: Attach the antenna cable's connector to the antenna input on your radio. The MRANT12W uses a standard connector, but verify compatibility with your radio's manual.

Tips for Better AM/FM Reception

Good antenna placement is the most effective way to improve reception. Mount the MRANT12W as high as practical and away from large metal structures. A clean, tight connection at the radio also helps.

Because the MRANT12W is a universal rubber duck antenna, it performs best in open areas. If you experience weak signals, try repositioning the antenna or adjusting the base angle. The supplied information does not specify an ideal height or angle, so experiment with orientation for your specific environment.