Quick answer

Display your Nendoroid Kano in a dust-free case away from direct sunlight, and pose her using gentle joint movements. Handle her included accessories—like the black cat and microphone—by their grips, and adjust joints slowly to avoid stress marks.

Choosing the right display spot

Place Nendoroid Kano on a shelf or in a display case that is out of direct sunlight. UV rays can fade her paint over time, especially the white and blue accents on her outfit. A spot away from heating vents also prevents the ABS and PVC materials from warping due to temperature changes.

If you have multiple figures, give each one enough space to avoid accidental bumps. Nendoroid figures are top-heavy, so a stable base is essential. Use the included stand and ensure it clicks firmly into the hole under her back before letting go.

Posing without breaking joints

Nendoroid joints are sturdy but not indestructible. When changing poses, hold the joint firmly and move it in the direction it naturally bends. Do not force a limb past its limit. If a joint feels stuck, warm the area slightly with your hands or run it under warm (not hot) water for a few seconds.

The three face plates—default, smiling, and winking—swap by gently pulling the front hair piece forward. Align the peg on the back of the face with the slot in the head, then press firmly but gently. Avoid twisting the face plate, as that can stress the peg.

Handling accessories with care

Kano comes with a black cat, a mahjong tile, and a microphone. These small parts are easy to lose, so keep them in a small container when not in use. When attaching accessories to her hands, align the peg with the hole in the palm and push straight in. Do not wiggle the accessory side to side, as that can widen the hole.

The black cat is a highlight of this set. Position it near her feet or have her hold it if the hand parts allow. The microphone can be posed in her hand or placed on a stand. If you have multiple Nendoroids, you can swap accessories to create new scenes, but always check that the peg sizes match.

Cleaning and maintenance

Dust builds up on figures quickly. Use a soft, dry microfiber cloth or a makeup brush to gently wipe the surface. Avoid water or cleaning sprays, as they can damage the paint. For hard-to-reach areas, use a cotton swab lightly dampened with water, then dry immediately.

If you notice a light dust film, you can also use a compressed air duster, but keep the nozzle at least 15 cm away to avoid moisture. Never use alcohol or solvent-based cleaners on ABS or PVC parts, as they can cause the plastic to become brittle or cloudy.

Diagnosing display and posing issues

  • Symptom: Figure won't stand upright: The stand may not be inserted fully, or the figure's center of gravity is off due to a pose that leans too far forward. Check the stand connection and adjust the pose to keep the weight centered.
  • Symptom: Joint feels stiff or stuck: The joint may be cold, or there may be paint friction. Do not force it. Warm the joint with your hands or warm water, then move it gently. If it still resists, stop and consider leaving the pose as is.
  • Symptom: Accessory peg won't fit: The peg may be slightly larger than the hand hole, or you are inserting it at an angle. Align the peg straight and push gently. If it still doesn't fit, try a different hand part or leave the accessory displayed separately.
  • Symptom: Paint appears faded or discolored: The figure may have been exposed to direct sunlight or harsh lighting for extended periods. Move the figure to a shaded area. If fading is severe, consider a display case with UV protection.

Product facts

  • Nendoroid - 1790 Kano - Kano: The Nendoroid Kano figure stands approximately 10cm tall and is made of ABS and PVC. It includes three face plates (default, smiling, winking) and accessories: a black cat, a mahjong tile, and a microphone. Knowing the size and materials helps you plan display space and understand how to handle the figure safely. The included accessories expand posing options, making this a versatile addition to any Nendoroid collection.